Turn Signals and Hazard Lights
Chevy Cavalier Z24
1982-1994 Chevy Cavaliers

93 Chevy cavalier turn signals want work fuses and bulbs r ok?

678

Top Answer
User Avatar
Wiki User
Answered
2008-03-27 08:16:37
2008-03-27 08:16:37

probably the turn signal flasher it is located next to the fuse panel

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


If the turn signals are not working properly on a 2002 Chevy Venture and the fuses seem to be alright, check for burned out bulbs in the turn signals. Also, check to make sure the turn signal flasher is working properly.

Check the fuses or change the bulbs.

check your fuses first, then check your bulbs and then your relay.

Check the fuses first. Is sounds like there is a power failure to the light system. There could also be a broken wire to the fuse box.

1994 Chevrolet Cavalier: Your owner's manual is the best place to locate your fuse box(es) and identify your fuses. Don't rule out that your issue is being caused by a bad bulb braking the circuit too - so check fuses and bulbs. See sources and related links below for bulb information.

have you tried replacing the flasher u need to replace the flasher can for the turn signals there are 2 one for hazards and one for turn signals usually found in the fuse box, and cost about 3 bucks

The 2002 Cavalier has a reverse light switch. The switch can be bad, or have a loose connection causing the lights not to work.

Could be the bulbs or the fuses or the flashers or the signal switch assembly

It could be the turn signal bulbs, some vehicles use separate bulbs for the hazard and turn signals. It could also be a bad switch or wires for the turn signals.

first things first check fuses. if fuses are good check check bulbs to see if they are burnt. Lastly the worst problem is the wiring. use amp meter to check wiring coming out of bulbs

Are you blowing fuses or are the bulbs blowing? Blowing fuses would be a sign of any wires or metal contacts in your brake circuit grounding out or shorting on themselves. You'll have to check all of the wiring in your brake light/switch circuit to be sure.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.