First, I would say to take it to the place where you had the car fixed, if that is not an option , you could check if the cable for the speedometer is loose. This is located behind the guage cluster, you should be able to see it if you get underneath the stering wheel, it will be a black thick (about 1/4 of an inch) and it will run through the firewall and into the transmission. Make sure that it is tight at both ends. If that is not it then you might want to replace that cable, you can usually get it at any auto part stores. Hope this helps. Good luck
its likely to be a fuse problem. the fuses can be found underneath the steering column usually
it doesnt have one, it is an electronic speedometer
its broke
Why doesnt your speedometer work on a 02 Mits Galant
Your speedometer might not be connected if it does not work. It might also have blown a fuse if it is an electronic speedometer or it could have a wire that is loose.
There are several things that can cause your speedometer to stop working. The most common cause is a blown fuse. The second most common cause is a malfunctioning speedometer cable.
it doesn't work!!
Really, for sure you can
If the digital dash lights up but shows no numbers for the speedometer on a 1989 Thunderbird LX, it is possible that a fuse is blown for the speedometer and the fuel gauge. There is more than one light in the dash for the speedometer.
U need a new speedometer cable. It runs from the transmission to the speedometer. They tend to break in half or just seize up after they get so old. They are easy to replace, it takes to people to do it but it is really easy to do. I hope I helped you.
sasuke doesnt have mercy for any1 nor does he love any1 since his family died when he was very young. he doesnt loove anybody and doesnt get married ...that we know of
you need to change the speedometer cause if your odometer is counting then speedometer should be working too. make sure your speed gear its working its in the side of the transmission The odometer and speedometer read off of the same signal. If one works, the signal is ok and the other gauge is bad.