0
A butt stock and shell ejector for a NO 15 Empire Ejector made by Crescent Firearms Company?
Wiki User
∙ 16y ago
What was the question?
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
What is a crescent firearms empire ejector 15 worth?
0-75 bucks
How old is a crescent firearms empire ejector 15?
1900-130 or so.
What is a 32 single barrel shotgun manufactured by Crescent Fire Arms Company worth?
Do you mean a 1932 Victor Ejector model? Do you mean a 1932 Victor Ejector model?
How much is a 12 gauge No. 15 Empire Ejector Crescent Firearms single shot shotgun worth?
50-150 USD
Where do you find information on a Crescent Empire Ejector 410 break over sn711 435?
Crescent made inexpensive "working" firearms 70-100 yrs ago
15 empire ejector norwick conn crescent firearms cop 12 gauge how old?
@ turn of the century plus or minus a few decades
How old is a victor ejector American gun company 12 gauge serial number 322878?
Victor shotguns were made by crescent firearms from 1904 to 1920. You can assume your shotgun is at least 90 +/- years old.
Where can you find parts for a 12 gauge Crescent Victor Ejector shotgun?
== ==
What year was this 12 gauge Victor Ejector serial number 360352 made. Any idea if there is any historical value. It appears to be an old piece of junk?
the Victor line of shotguns were made by Crescent Firearms Company, circa 1904-1920 Crescent was a sub contractor for many different shotgun distributors........... Crescent firearms were not high on collectors list..................
What is the approximate date of manufacture for a single barrel utility shotgun made by Crescent Firearms Co of Norwich Conn with the name Victor Ejector?
It would be somewhere between 1893 and 1930.
Would like to know the value of Crescent Firearms 410 exposed hammer with 15 Empire Ejector Serial 739233?
if its a single shot, then 75-150, a double barrel possibly 300
How do you remove ejectors on a lanber?
Got an answer from the importers. The Ejectors are held in place by the Ejector Trips, these run vertically up and into a slot on the ejectors. On the ejector trip is a very small pip with a hole in it, underneath this hole there is a small plunger and coil spring (this keeps the ejector trip in place, not allowing the ejector trip to drop down). To remove the ejector you need to have a small pin punch that you place into the hole of the pip. The process of removing the ejector is as follows, keeping the ejector held into the barrel, insert pin punch into pip hole (depressing the plunger and coil spring), pull the ejector trip very slightly downwards. Releasing the ejector it should now slide out. When replacing the ejector all you need to do is push ejector back into barrel and at the same time push ejector trip upwards locking ejector and ejector trip in place.
