Any building that wish to survive a substantial earthquake should be able to sway. Most buildings in Japan are constructed with isolation bearings, that allow the buildings to sway from side to side during an earthquake.
To be earthquake proof, buildings, structures and their foundations need to be built to be resistant to sideways loads. The lighter the building is, the less the loads. This is particularly so when the weight is higher up. Where possible the roof should be of light-weight material. For more info check the link.
There are many considerations to take into account. What will the building be used for? (Commercial, Residential, Agriculture, etc.) Local building codes should be the #1 guide, of course.
towards the inside of the building
You will need to take classes and get certified. You can see more here http://www.ehow.com/how_16071_become-building-inspector.html
Depends on size of transformer and type (dry,mineral oil, silicone) as well as ground slope and building construction.
Any building that wishes to survive a substantial earthquake should be able to flex. Construction companies know how to make a building better withstand the effects of earthquakes by making them more flexible.
it should be checked by the contractor
In an earthquake, you should avoid being inside of a building. You should also avoid being around anything that could fall and hurt you.
There not much to do its unexpected you should live in a building in the lower floors and the building should have earth resistant movement
The main precautionary measurements when there is earthquake is that move to a place where there is no building. No one should stay in their houses at that time.
Well...it depends when on the situation you are in. If you are not sure, my best advice is to listen to what earthquake experts say:-)
The best way survive an earthquake is lay next to a piece of furniture that is longer than you are tall. You do not want to be under the furniture in case the building's roof collapses, because that piece of furniture will also collapse. When it does, there will be a void left on either side of it, where you can be safe from the falling debris.
They all do have laws for making a building earthquake proof.
Its not about the hight of the building its about the shape of the building. The building should be a triangle shape with a wide base and a narrow point; to help with stand a earthquake there is normally a tank of water at the top because if the building starts shaking the water would go in the oposite direction of where the building goes. Also at the bottom there should be large springs to allow the building to sway a little because if it is firm and still presure will build up and the building will collapse
No building is seismic safe. No building is earthquake proof. However, there are steps that can be taken to make buildings more earthquake resistant. Concrete buildings made without rebar will collapse in an earthquake. Concrete buildings and concrete block buildings in Guatemala that hold up in earthquakes are those that use a lot of rebar. It is also important to use metal straps to tie the roof to the walls. The straps are inexpensive, but they maintain the integrity of the building. The roof should have cross pieces.
When builders are making a building they should make the foundations strong and stable so the buildings dont fall
To be earthquake proof, buildings, structures and their foundations need to be built to be resistant to sideways loads. The lighter the building is, the less the loads. This is particularly so when the weight is higher up. Where possible the roof should be of light-weight material. For more info check the link.