Want this question answered?
PSIA is Pounds per Square Inch Absolute, as opposed to PSIG which is PSI Gauge. PSIA is absolute pressure. For example, normal atmospheric pressure is about 14.7 PSIA, so a PSIA device connected to atmosphere would read 14.7. PSIG is relative pressure, so if system pressure is 15.7 PSIA, and atmospheric pressure is 14.7 PSIA, then PSIG would be 1.0
14.7 psia represents standard atmospheric pressure, or 1 atm. PSIA is just psi with atmospheric pressure taken into account also.
psia=psig+atmospheric pressure where, atmospheric pressure = 14.7psi therefore psig=psia-atmospheric pressure psig=100-14.7 psig=85.3psig
psia to psig psig - 15 15 - 15= 0 psig
psia IS the abbreviation. It stands for Pounds per Square Inch Absolute. When determining a pressure, you are typically measuring it with something that is subjected to atmospheric pressure (1atm~14psia) just like you and I. So say you inflate your tires to 35 psi and check it with a tire gauge. That reading is the GAUGE pressure, or psig. Typically, gauge pressures will not use the G at the end because people tend to be good enough at noticing that there's a difference between "psi" and "psia" and start to ask questions. The ABSOLUTE pressure is the gauge pressure plus the atmospheric pressure. Expressed in equation form, this looks like: psia = psig + atm -or- psig = psia - atm In the case of a vacuum, where there is less than atmospheric pressure, an absolute gauge will read positive values while a typical gauge will read negative values. The equation still holds true. Example: Absolute pressure = 4 psia 1 atm ~ 14 psia What is the gauge pressure? -10 psig 4 psia - 14 psia = -10 psig
add atmosperic pressure to gage pressure to convert to psia one atm standard = 14.7 psi
14.7psia = about 30inhg thus, let 14.7 be 15 for easier calculations if 15 psia = 30 inhg then 1 psia = 30/15 inhg therefore 1 psia = 2 inhg or 1 inhg = 0.5 psia so 10 inhg is about 5 psia hope this helps
Among other things, it may refer to a non-standard (non-SI) unit of pressure, "pounds per square inch".Psi is a Greek letter in the Greek alphabet (uppercase Ψ) (lowercase ψ).When it is used in mathematical form it is called The Reciprocal Fibonacci Constant (Fibonacci discovered it) and it equals approximately 3.35988566243177553172011302918927...
70 psig
The difference between Absolute Presure and Gauge Pressure is 14.7psi. So zero gauge pressure (0psig) = 14.7 psia. 600 psig = 614.7 psia. Calibrate the tranmitter so 4mA is obtained at 14.7 psig and 20mA is obtained at 614.7psig. The span will be 600 psi in both cases.
14.696
14.696