No, amps is a unit of electric current. An analogy in fluids would be gallons per minute or cubic meters per second.
PSI (Pounds-force per square inch in fluids) would be analogous to Volts. Another term for Voltage is Electromotive Force (EMF)
The formula you are looking for is I = W/E. Amps = Watts/Volts.
To convert LRA (Locked Rotor Amps) and RLA (Running Load Amps) to amps, you typically just use the values directly, as they are already expressed in amps. LRA indicates the current drawn by the motor when it is starting and locked, while RLA is the current it draws during normal operation. For example, if you have an LRA of 690 and an RLA of 147, those values represent the motor's current in amps during their respective conditions.
In the electrical trade the only time there is a reference to start and running amps is when dealing with motors. The running amps is always lower than the starting amps. A 78 amp electric furnace will take a 100 amp service for it to operate and be within the electrical code guide lines.
Full load amps is the amperage at which the motor was designed to work at to achieve its rated horsepower. Service factor amps is the amount of a periodic overload at which a motor can operate without overload or damage. Continuous operation within the service factor amps will shorten the insulation and motor bearing life of the motor as the motor will be operating at a higher temperature than it was designed to.
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.
Well, if the alternator is on any type of vehicle that has been made within the last 100 years, it will be the 100 amp alternator. There is no such thing as a 1900 amp alternator for a car. The highest I have seen is about 150 amps, and that is a heavy-duty truck alternator.
Any battery can die at any time. The cold cranking amps of the battery is not a factor. I have even seen brand-new batteries die within 30 days of their purchase so it is possible. Return the battery under the factory warranty.
0.35897 amps = 0.35897 amps.
200ma is .200 amps or .2 amps
7 amps
Yes, the current measured in amps is the same as the keyword "amps."
Amps is amps be it DC or AC.