Want this question answered?
Water heaters can operate without an anode rod. If tank is not made of steel, then no anode rod is present. If tank is made from steel or glass-lined steel, then anode rod is necessary for long life of tank. Without anode rod, water will rust tank causing leaks and possible failure where tank bursts open and floods house until water is turned off. Anode rods are made of lower noble metals than steel water heater tank. When the two metals are connected together, water reacts with lower noble metal first, so the water dissolves anode rod instead of rusting tank. Anode rods should be checked every two-four years, more frequently when water is softened. Factory-made, gas and electric, steel water heaters come with one or two anode rods installed. Tanks with longer warranties generally have two anode rods. Check manual for specifics. Adding a second anode rod can prolong life of water heater. Ship hulls and propellers, and steel bridges, and other structures that come in contact with water also have anode rods.
Anode rods are used in RV and home hot water heaters. Aluminum tanks are not required to have an anode rod where steel tanks usually are.
yes very :)
Ive never heard of them being used before in salt water pools.
yes
Swimming in cold water can affect titanium rods because this area of your body will be more sensitive. You may notice soreness in the area of the rods after swimming in cold water.
The carbon rods have electrical resistance. Thisi causes them to heat when current is passed through them. The water gets heated by the carbon rods.
it is not necessary but it dose help the tree grow better.
You can build a ring toss by taking another piece of wood and drilling holes in it the same size as the dowel rods. Place the dowel rods in the holes and glue them if necessary.
In water reactors the fuel rods are clad with zircaloy sheaths
Water is pumped around the fuel rods.
AS water heaters age, they corrode and also incur mineral deposits and sediment at the bottom of the tank. This sediment is what causes the popping noises when the heater turns on. It is mini explosions inside the tank. Having yearly maintenance on the water heaters helps to prolong your heaters from having this issue by flushing out the sediment buildup and replacing the sacrificial anode rods when needed.