Not unless they catch fire or get out of their container.
Yes, polystyrene beads are safe to use. One can learn more about polystyrene beads at popular on the web sources such as Tempo Foam, eHow, and Wise Geek.
Polystyrene is today difficult to be recycled.
Are you still seeking PS beads? If so how much, of what size and what is the application?
For health hazards of polystyrene, type polystyrene in the ask box, go all the way down to the last definition. Click on the underlined words Health Hazards, and you have a full paragraph on polystyrene.
easy the ball bearings are heavier so give it a shake and they will fall to the bottom and the polystyrene will go to the top or you could also use a magnet
Styrofoam cups are made of expanded polystyrene beads. The unexpanded beads (about the size of sand grains) are put in a mold then exposed to steam which expands them to grain of rice size and sticks the beads together into the finished product.
The mixture of Polystyrene and Acetone results in the creation of a sticky residue as the Polystyrene beads dissolve into the Acetone. You can use Nail polish remover with Acetone. However, the chemical reaction occurs at a much more rapid pace with pure Acetone.
Polystyrene is not a hazardous material (dangerous good) in transportation. However, in circumstances where a fire might be a problem, polystyrene, which can readily and rapidly burn, can be a very hazardous material.
Polystyrene (styrofoam) is extracted from oil. Thousands of small units of styrene, called monomers, link together to form large molecules of polystyrene by a process called polymerisation. Expanded polystyrene starts as small spherical beads with a typical diameter of 0.5-1.5mm. They contain an expanding agent; a pure hydrocarbon, which does not contain any halogens and does not damage the earth's protective ozone layer. When the beads are heated with steam, the agent starts to boil, the polymer softens and the beads expand to about forty times their initial size. After a maturing period to equilibrate temperature and pressure, the pre-foamed beads, which now have a closed cellular foam structure, are placed in a mould and again reheated with steam. The mould can be designed to meet any requirements of the customer. The pre-foamed beads expand further, completely fill the mould cavity and fuse together. When moulded, nearly all the volume of the EPS foam (in fact 98%) is air. This is what makes EPS so lightweight and buoyant. ---Shawn
It is aluminum powder. The powder is mixed with polystyrene beads, which help distribute the powder. It's possible that the beads also create a little electrostatic charge, which makes the powder stick to the glass better.
The answer will depend on the waste material. A container full of polystyrene beads and another full of lead pipes will obviously have very different masses.
No, but it is messy. It's a very fine aluminum powder (and some polystyrene beads) that gets everywhere. It's not toxic, but it's definitely not healthy to inhale the stuff.