1997 2 wd and 4wd both use the same size wheels. later models and bigger pickups have different sizes no 4wd use 17" and 2 wd use 16"
I believe they are the same fronts. Measure the fenders to be sure.
Is the 1997 F150 Transmission is the same as the 1999 Expedition
No, the 2000 f150 used a 5 lug wheel while the 2005 f150 switched to a 6 lug pattern.
In a short, yes you can as long as you do all of the tires/wheels the same height. 16" wheels came standard on many of those F-150's, maybe all of them.
It's located inside the on the passenger side under the glove compartment. Also the blower motor is the same type for all F150 from 1997 to 2003. Allen Bouvier, Fort Simpson, Northwest Territories, Canada.
the internals of the transmisision is the same should be be able to switch out, but may have to change bell housing on the tranys
the model year 1992-1996 the tailgates and body styles for the f150, f250, and f350 were that same and the 1997 f250 and f350 were the still the same design. The f150 however were not. so in short it will fit a 92-96 f150, or a 92- 97 f250 or f350.
depending on size of ranger they generaly will fit the same make
Are the GPS systems in Ford F150 2010 the same size?
Unless the 2004 is a heritage edition F150, which had the same body style as the 2002 ford would have, they will not fit. The 2004 F150s, other than the heritage edition, all used 6 lug wheels, while the 2002 used 5 lug wheels.
same order you take it off
The Expedition should, and that's about it.
Ford makes wheels for all the Ford model cars, naturally. Both models that are in production and older models. Since Fords come in pretty much all sizes, wheels can be obtained in all standards. It is advised to get a wheel from the same make as the car owned: Buy Chrysler wheels for a Chrysler, and Ford wheels for a Ford.
If the stud spacing, and offset is the same, then it will fit. Measure them both. Too stick the wheels on, not to sniff!
The wheels from a 2500HD Chevrolet will not fit on a F250 Ford because the lug nut pattern is different. The only way wheels are interchangeable is if the lug nuts have the same pattern and are the same size.
It is the same car!
It has the same look compared to it, but a different grille
We had the same problem, and our 1998 F150 needed a new instrument cluster.
Bolt Patterns are different ; 1992 Ford Ranger = Bolt Pattern: 5-114 1996 F150 = Bolt Pattern: 5-139
1997 wheels on 2000 silverado? the wheels are the same, drum or disc. /
As long as the hole match and the bed size are the same I don't see why not.
The video below might help. Trying to describe it would be far more difficult than just having you look at the video. The vehicle in the video is a 1997 Expedition, but much of the design is the same for a 1994 F150
As long as they have the same number of lug nuts they will fit.
It depends on if they are the same bolt pattern.
Yes, they have the same lug pattern.