go to your local auto zone, oreilley, or advance autos and look at a manual there
or try these links:
http://i603.Photobucket.com/albums/tt120/TomS93Cobra/BMW%20Tech/Tensioner.png
http://www.bmw330ci.net/maintenance/belts.php
The alternator is driven by the drive belt. Find the belt and follow the routing and you will find the alternator.
Need a serpentine belt routing diagram for a 2002 Toyota rav4.
To change the alternator drive belt on a 2002 Chrysler Concorde, first, disconnect the negative battery terminal for safety. Then, locate the belt tensioner and use a ratchet or wrench to relieve tension on the belt. Remove the old belt from the alternator and other pulleys, then route the new belt according to the belt routing diagram typically found on a sticker under the hood. Finally, reapply tension on the belt using the tensioner, double-check the alignment, and reconnect the battery terminal.
Need alternator belt routing on XC70 2003 Volvo
The belt routing for a 2002 Oldsmobile Silhouette typically involves a serpentine belt that drives multiple accessories including the alternator, power steering pump, and air conditioning compressor. To properly route the belt, it should follow a specific path around the pulleys, looping around the crankshaft, tensioner, and other components as indicated in the vehicle's service manual. It's essential to ensure the belt is seated correctly in the grooves of each pulley to prevent slippage or damage. For precise routing, refer to the belt routing diagram usually found on a sticker under the hood.
how do u replace alternator belt on 2002 mazda protege 5 stationwagon
There are no 1996 stanzas
The serpentine belt routing for a 2002 Infiniti QX4 typically involves a path that loops around several pulleys: the crankshaft pulley, the alternator, the power steering pump, the idler pulley, and the tensioner. To properly route the belt, it starts at the crankshaft, moves upward to the alternator, then down to the power steering pump, and wraps around the idler and tensioner before returning to the crankshaft. It's important to refer to the vehicle's service manual or an under-hood diagram for the exact routing to ensure correct installation.
There should be a placard with a diagram of the routing of the belt, located under the hood.
To replace the alternator belt on a 2002 Mazda 626, first, disconnect the negative battery terminal for safety. Loosen the tensioner pulley by turning the adjustment bolt, then remove the old belt. Install the new belt, ensuring it follows the correct routing path, and retighten the tensioner. Finally, reconnect the battery terminal and start the engine to check for proper operation.
To change the alternator belt on a 2003 Mitsubishi Lancer, first, disconnect the negative battery terminal to ensure safety. Then, loosen the tensioner pulley by turning the adjusting bolt and remove the old belt from the alternator. Install the new belt by routing it over the alternator and other pulleys according to the belt routing diagram, then adjust the tensioner to apply proper tension to the belt. Finally, reconnect the battery terminal, start the engine, and check for proper operation.
Remove the neg battery cab;e then the wires on the alternator.. Disengage the belt and take the mounting bolts out of the alternator. There should be a routing schematic for the belt on the fan shroud.