Fuse, Bulb, Open Circuit
===================================================
Just adding to the answer :
If none of your brake lights work it could also be the brake light switch
located on the arm above your brake pedal
brake lights dont work
change the brake lights check the fuse check the brake light swtch
Check the fuse, the bulbs, and the brake light switch.
Brake pedal switch, wiring, bulbs, bad trailer harness (if there), fuses...
all my lights work except my break lights, when i push on the peddle they dont go on can you help me?
i got a 2006toyota highlander my tail lights dont work but,every other light works please help me
Did you replace the fuse? have you checked the circuit board well the lights go on cause they tend to short out often
Bulbs, wiring, fuse, brake light switch.
Check the brake light fuse. If you have 12 volts at the brake light switch I would suspect the signal light switch is at fault.
I am having the same trouble. My brake lights work with the light switch for nighttime driving, but only far right brake light works when i pres brake pedal. Reverse lights dont work at all. Turn signals and hazard light work.
my back brake lights don't work, but the brake light on the back door does what could be wrong
If the headlights are on and brake lights work but not the tail lights, it is possible there is a short in the electrical wires. Another cause for this could be that the tail light bulbs are burned out. Most vehicles have more than one bulb inside the tail lights to control different lights at the same time.