try adjusting switch above brake pedal
If you brake lights are not working on your trailblazer it could be due to a number of reasons. Your fuse could be blown, or your light may no longer work.
One or both your break lights are no longer working.
The turn signal and the hazard lights each have their own relay. Sounds like you have to replace both relays.
there may be a short get longer wires
Because the lights that cause them are relatively low. Lower lights ==> longer shadows. Higher lights ==> shorter shadows.
Fluorescent lights are more expensive to buy, but cheaper to run and they last longer.
you should just download an NRI folder. It will take care of it.
The brake lights may not work on a 1993 Honda Prelude if the brake light switch is no longer working. The brake light switch is in the steering column just above where the brake pedal is bolted to it. There is also a chance that a brake light fuse is blown.
The S-Type Headlight switch on the end of the turn signal stalk has several settings for headlight functions. The Auto setting turns the headlights on automatically in darkness, (and off in light), and the settings with longer and longer lines leave the lights on after you get out, for longer and longer times.
no longer used monarchies
neutral safety switch (located on transmission) is no longer working.cost for the part will very from 13.00 to 50.00 ,unplug wires to switch and wrench out the old switch reverse that for the new one.
A Switch can not breakLittle Kids can easily turn the lights on and offWe no longer have to get up and click the Light Switch