they stay on because your break light switch has this little button that when you press it, well it will turn off nd tahts when you let go of the break nd when you press the break it releases the the button but also the break has a rubber thump thingy on it nd that must of broke cuz once it breaks the little button just goes thrue the little whole where you put the littl rubber thumper thingy yes because that had happened to my 240sx ... ^_^
turn the inside lights off
The brake lights won't turn off because the brake light switch on the pedestal of the brake pedal needs to be replaced.
In this order only. Turn engine off. Depress parking brake. Turn engine on. Lights will turn off. To turn lights back on relase parking brake.
Is it the taillights or the brake lights? If taillights it may be a wiring problem, If brake lights check the switch on the brake pedal
turn the car off and apply the parking brake, when you turn the car back on, or to the accessory position, the daytime lights will not come on until you lower the brake lever
It is possible the brake light switch is broken or out of adjustment and the lights you see in back are the brake lights stuck on.
=I don't know about the brake lights. I know that most cars, when you turn it off and get out, the head lights and main backlights stays on for a while but then goes off. The brake lights? Maybe it's the way that car is or something is wrong with the brake or you have it on wrong.=
The only way to turn them off is to shut off the ignition, pull on the parking brake lever, then restart your engine. Running lights should be off. Once parkig brake is released, lights will come back on.
Often this type of behavior is caused by a bad ground for the lighting circuit. Check the ground circuit for the brake lights.
Sounds like it sticking from under the brake pedal. Have the brake switch looked at. It may need to be adjusted of replaced.
Check the brake light switch down on the brake pedal.
there is an adjustable brake light switch under the pedal.