answersLogoWhite

0

Sometimes the burnt out light warning light will come on with a good bulb with some corrosion. Take out each bulb and check for corrosion around the base of them and clean them up with some fine grit sandpaper.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

Why does yellow back of car warning light come on a 1996 Toyota Camry?

You have a tail light burnt out.


What would cause the running or tail lights on your 1994 Camry not to work while the head lights brake lights and turning signal lights work?

There is a relay in the trunk (left hand side wall) that may have been burnt. You may want to check this out...had the same problem with my 1992 Camry.....different year of course. The wires to the running lights were broken and exposed, caused a short, which in turn burnt the relay in the trunk.


How do you reset the light sensor on a 1998 Toyota Camry?

Replace the bulb that is burnt out.


Why would brake lights on 1997 Chevy Camero not work when lights are on?

The bulbs are burnt out.


Toyota Camry 2002 my head lights radio heat work dash panel and gauges do not work what is my problem?

Check the fuse box. The problem is probably a burnt out tail-light switch.


What is the warning light on a Rav4 that sits in the middle of the dials and looks like a car with rear lights on?

The warning light that looks like a car with its rear lights illuminated on a Toyota RAV4 indicates that the vehicle's rear lights or brake lights are malfunctioning. This could mean that one or more of the bulbs are burnt out or that there is an issue with the electrical system. It's important to check the rear lights and replace any burnt-out bulbs to ensure safety and compliance with road regulations. If the light persists after checking the bulbs, it may require further diagnosis by a professional.


Is cliffton a burnt dude?

yep hes burnt if u turn the lights off he will disappear also he is so weak he lost all of fights hes a punk


Signal lights won't blink?

burnt fuse. check the fuse box


How do you fix the lights on the stereo that have burnt out?

To fix burnt-out lights on a stereo, first, unplug the device to ensure safety. Open the stereo casing, usually by removing screws, to access the burnt-out bulbs or LED indicators. Replace the faulty bulbs with new ones of the same type or, if applicable, solder in new LEDs. Finally, reassemble the casing and plug the stereo back in to test the lights.


What does the symbol on the lower left side of a 2000 Toyota Camry mean it looks like something about tail lights?

it means one or more of the lights in the back of the car is burnt out or not functioning properly. (i.e. a bad ground or abnormal resistance in a bulb filiment)


What is the burnt part of toast called?

The burnt part of toast is commonly referred to as the "charred" or "burnt" portion.


What is the past participle form of verb burn?

Burnt burn burnt burnt