The crankshaft cog has a mark that lines up with the back housing for No.1 TDC. The cam cog has two marks that are put in the 3 o'clock position, the one at 12 o'clock lines up with the center mark on the front of the cam cover.
ford doesnt put timing marks on anything. u need a special cam gear alignment tool
The timing marks are marks on the front main pulley. The marks indicate when a certain piston is at the top of its stroke. You can turn the pulley to a certain position, aligned with the timing marks, and no that piston is at the right position to set the timing.
where are the timing marks on a ford ka 1.3 and how do i check the timing is correct
timing marks for a ford escape 2002
Ford doesn't use timing marks sorry
On the SOHC 1.6 there are timing marks on the sprocket and rocker cover and on the block on the exhaust side about level with the top of the manifold.. I don't know if this helps. I hope so.
THERE ARE SMALL HOLES IN THE TIMING GEARS THAT LINE UP WITH MARKS ON THE FRONT OF THE HEAD. When the crank pulley is at TDC on the compression stroke, 'E' & 'I' on the camshaft sprockets should be at 12 o'clock.
Timing marks for twin cam 1.6L B6 engine. When crank pulley is at TDC on the compression stroke, 'E' & 'I' on the camshaft pulleys should be at 12 o'clock. Too easy.
Where are the timing marks on the cam gear on ford 2.9 engine
The timing marks for your 3.0 liter V-6 Ford Taurus can be found on the main pulley. The timing marks can also be found on the flywheel.
3.0 liter timing chains marks
The crankshaft cog has a mark that lines up with the back housing for No.1 TDC. The cam cog has two marks that are put in the 3 o'clock position, the one at 12 o'clock lines up with the center mark on the front of the cam cover.