Yes.
Yes you can. The maximum charge current for LiPo batteries is '1C' where 'C' is the capacity of the battery in question, in your case C is 2000mAH. So you will be charging at 0.5C which is fine.
Looks like both are NiMH as NiCd batteries are generally not available for more than 800mAH rating. NiMH are common to have 1600mAH and more rating per AA cell. - Neeraj Sharma
No, an 8.4 mini pack will not fit. You will need a crane stock specific battery like an intellect 9.6v 1600mAh
First day you need charge 12 hour then after you can charge 3-5 hour
Yes .maH means the capacity of battery.More maH requires longer time to charge
yes u can u can get carge as u play cables and carging platforms.
Just a little under an hour for 1100mAh-2200mAh batteries but probably 2 hours and up for bigger batteries. I charged 2 1600mAh batteries (1 being 8.4v an the other being a 9.6v) in under 2 hours.
None... only Mah is compatable, if you try to use that charger with different voltage you're probably gunna break your battery. Buy a SMART CHARGER! JESUS! THEY'RE ONLY 25$!
It really depends on your charger. If you have a charger that can deliver 2000mAH then the charge time would be 3700/2000 = 1.85 hours. I've heard that charging no faster than an hour is good practice. So, check your charger output.
Replace will replace one instance of what you want to replace. Replace All will replace all instances of what you want to replace.
well... chemically not unless you ripped it apart. however, if you want to customize your amperage or voltage, theres no need to go through all that work.there are systems of wiring called series and parallel. in series wiring, one battery acts as a booster for another adding the two voltages together.in parallel, the amperage of the individual batteries (which is a measure of the # of flowing electrons) are added together.for series wiring (add voltages) attach the positive end of one battery to the negative of the other. then hook the non-connected ends of each battery to your circuit. if you had 2 9V batteries, you now have 18 volts. if you had 10 1.5 volt batteries (like AAs) you now have 15 volts. however, this does not increase or decrease the ssystems' amperage. 10 2000mAh batteries in series still have only 2000mAhfor parallel wiring (add amperage) connect the positive lead on your circuit to BOTH POSITIVE ends of the battery. then connect the negative lead of the circuit to both negative terminals on the battery. now instead of having 2 batteries with 2000mAh and double voltage, they act as one battery with 4000mAh, but half the voltage.examples2- 1.5 volt 2000mAh batterieswhen wired in series- current of 3 volts and 2000mAhwhen wired in parallel- current of 1.5 volts and 4000mAh