Want this question answered?
We use a RG6 coax cable from the dish to the receiver. The cable used between the receiver to the TV varies.
No you cannot. The receiver decodes the signal coming from the satellite that is unique to DISH Network.
To use an HDMI cable for your receiver, you need a VIP receiver.. Each of these receivers have an HDMI port you can use to connect to your TV. You also need HD programming to take full advantage of the HD receiver and HDMI cable.
For Dish Network, we use RG6 coax cable to allow a higher frequency range for the satellite signal from the dish to your receiver. Any coax cable not rated at RG6 could affect the signal.
Coaxial cable RG-6 is used for satellite TV wiring. If you have a HDTV, you would want to use a HDMI cord from your Dish Network receiver to your television. This will give you a great picture!
Yes, there is no difference. I use a Direct dish and an Expressvu receiver at the cottage.
Yes, you can use an HDMI cable to connect your dish network receiver box to your DVD recorder or the normal AV cables. However, HDMI is perfectly advisable to use.
Actually, you can use a legacy receiver with a DISH Pro dish. An adapter is needed at the receiver to get the proper signal for that receiver. No, Dish Pro is a stacked technology, which the older 3700 will not recognize.
As long as it is a Dish Network receiver that is current, it is allowed. However, it has no effect on monthly charges if you choose to use your own receiver.
Bell and Bell receivers are strictly for use in Canada.
No, it is made for use with cable only.
No, you can not use that HD receiver because in order to start services on that HD receiver cable provider needs the Serial Number of that receiver and cable providers only activate services to their own properties they only can rent you their own receiver but can not activate the services on a box which is not their own