Yes .
I would think medically not advisable.
With WD40
I spray it with WD40 but the approved technique is to rub it with a candle. That way the wood is not covered in rust marks.
Answer: LUbricate the Chain (Not using WD40) Keep Tyres Inflated Keep All Bearings adjusted and greased.
WD40 decreases friction between two metal pieces. The oil adds lubrication that does not dry on contact or with heat, which can build up in machinery. Other than dirt or piece of rust, little else can gum up WD40 so it provides lubrication for months to years.
I dont know how to do it on a cavalier but if your just doing it to lubricate the cylinders you can spray white lithium or just wd40 into the cylinders where the plugs go.
oil if not then spray a bit of WD40 on it never fails =] (oil will work better thoug so use that for preference)
use a wd40 spray or a moly spray lub and spray on tracks this help you but stay away of the glass when spray over
Yes, oil is used to lubricate internal combustion engines. Grease is used to lubricate electric motors. =========================================================== I have always used non detergent oil in my ELECTRIC MOTORS and grease for the bearings if there is a grease fitting
Things to check, is the release all the way in? Lubricate the lock, WD40 or similar. Adjust the lock up if needed. After you lubricate the lock mechanism, cycle the hood release cable a few times, so that the lubricant penetrates. Continue to lubricate the mechanism at least once every few months to prevent future sticking of the cable.
No. WD40 is to aggressive to use on the thin skin of a horse. Only use things meant specifically for horses.
Remove the door panel and lubricate all the mechanical linkages with WD40. Probably, rain or high humidity is collecting inside and rusting the metal badly enough to affect its functioning.
You need to lubricate the squeaky hinges.I will lubricate the parts later.