Block and heads are the same. Manifolds are different.
Block and heads are the same. Manifolds are different.
Block and heads are the same. Manifolds are different.
Lower front left of engine.
egr was not installed until 2005 on this particular engine.
The Dodge Sprinter did not come out until 2002. The heater is an add on option that is installed in a freeze plug on the passenger side of the block.
No, the bell housing patterns are different.
A 2000 Dodge Stratus has four engine mounts.
Dodge does not have 4.3L engine. A 3.7L was not used in a 2000 Dakota. So no.Dodge does not have 4.3L engine. A 3.7L was not used in a 2000 Dakota. So no.
No, it will not interchange.
There is no difference in a 1995 dodge dakota with a 3.9 v6 engine and a 2000 dodge dakota with a 3.9 v6 engine and you can exchange the newer engine with the older one.
Where is the MAF sensor located on a 2000 Dodge Ram 1500
The engine codes for a 2000 Dodge would be either 2 digits long or 4 digits and start with a "P".The engine codes for a 2000 Dodge would be either 2 digits long or 4 digits and start with a "P".
The engine control unit (computer) controls the idle. The only way to alter it is to either have a performance chip installed or have an engine tech alter your stock chip (may or may not be possible).
Ignition timing for 2000 Dodge 3.9L engine is set and maintained automatically by the engine's electronic control module and is not possible to change.