0
When flexible cords are talked about the ground wire is in the conductor count. A four wire cord will have black, red, white, and green coloured wires in the flexible cable set. A three wire cord will have a black, white and green coloured wires in the cable set. To use a four wire cord to carry 220 volts just use the black, red and green wires. Connect to the cord ends. Black and red to the outside blade terminal screws and the green wire to the green ground screw. To use a three wire cord to carry 220 volts just use all of the wires. Black and white to the outside blade terminal screws and the green wire to the green ground screw.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
On three wire spin dryer cord which color green white?
On a 3 wire dryer cord there is no green wire. The white wire coming from the outlet is connected to ground or the green screw. The black and red wires are the hot wires.
What size wire to use with 50 amp 480v 3 phase so cord size?
6
How do you install a ceiling fan to plug into a wall outlet and should you use two or three strand electrical cord and which strand on the cord connects to which fan wires?
The neutral wire will have writing or ribs on it and connects to the white wire. The smooth wire is hot and connects to the black wire. Use 3 strand wire in size AWG # 16. If the fan has a light it will have a blue wire. Connect that blue wire to the black wire.
Would using a 60 foot extension cord which is 6 gauge 3 wire cord on a 220 volt single phase welder present any problems?
It shouldn't. Check the nameplate for input amperage of the machine. Your #6 wire is good for 60 amps. If the nameplate amperage is below 60 amps then you are good to go.
How do you convert an older electric range to a 4 wire plug when there is no bonding strap on the range It now has a 3 wire cord I need to convert it to a 4 wire cord.?
The difference between a 4-wire and a 3-wire is a separate ground and neutral. That being said, all you have to do is connect the ground wire to chassis ground, and the neutral wire directly to the neutral connection. The phase wires are made up the same as the old cord. You must also remove the bonding jumper, but if there isn't one... IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS. If you do this work yourself, always turn off the power at the breaker box/fuse panel BEFORE you attempt to do any work AND always use an electrician's test meter having metal-tipped probes (not a simple proximity voltage indicator) to insure the circuit is, in fact, de-energized.
How do you wire a 220 3 wire breaker to 4 wire dyer?
Buy a 3 wire cord for your dryer.
How do you wire a 3 way cord?
He do you splice and rewire an iphone4 cord
Can you construct a 3 wire power cord to a 3 wire extension cord?
you need to state more information but in any case yes you can.
On three wire spin dryer cord which color green white?
On a 3 wire dryer cord there is no green wire. The white wire coming from the outlet is connected to ground or the green screw. The black and red wires are the hot wires.
What is the extension cord with 3 prong could be used for?
Depends on the size of the wire in the extension cord. The 3 prong is just the hot, neutral, and ground.
Can you safely connect a 14 gauge 3 wire heater to a extension cord rated 16 gauge 3 wire?
16 Ga wire is smaller than 14 Ga. The answer is absolutely NO!
What size wire to use with 50 amp 480v 3 phase so cord size?
6
How do you install a ceiling fan to plug into a wall outlet and should you use two or three strand electrical cord and which strand on the cord connects to which fan wires?
The neutral wire will have writing or ribs on it and connects to the white wire. The smooth wire is hot and connects to the black wire. Use 3 strand wire in size AWG # 16. If the fan has a light it will have a blue wire. Connect that blue wire to the black wire.
What size wire should be used for a clothes dryer on a 30AMP circuit?
In Europe we would like to see that on 6mm square conductors
The electrical cord on the kiln only has three wires. How do you wire to a 3 prong plug?
Black wire to the gold screw, white wire to the silver screw, green wire to the round or U shaped prong screw.
Does a 240V 4-wire to 3-wire converter exist or can one be easily made?
Sounds Like You Are Trying To Connect A 4 Wire Dryer Cord To A Three Wire Recptical. Try To Find A 3 Wire Cord, If This Is A Clothes Dryier, & Install It On The Dryier. A Used Appliance Store Will Have One. If This Is Not Your Situation Reask Question. And Forgive Me Also No They Don`t Make This Type Adapter. Or At Least I`ve Never Seen Or Heard About It.
How do you wire a 3 wire 240 volt stove to a 240 volt 4 wire feed?
Change the cord/plug on the stove to a four wire cord/plug. When installing the new plug remove the grounding strip that connects the center lug in the stove wiring block to the frame of the stove. Connect the white wire from the new plug to the center lug. Connect the green wire from the plug to the stove frame.
