The motor will run, probably at nearly the same speed, but it cannot supply the same mechanical load. If it can be run on a lighter load, proportional to the voltage, it should be OK.
It will not work at all.
Yes. It will make your motor a little faster though, so it depends on what you are powering with this motor. IE Can the piece of eguipment be ran faster?
It will probably run but not correctly. Low voltage will cause the motor to draw less amps than it's designed to. It will not reach its rated RPMs and such slow operation may shorten its operating life.
This should not be a problem but check with the manufacturer of the laundry equipment to be certain.
What effect will be there on the motor (Induction) output power when a 100kW 50hz motor is connected to a 60hz power supply.
The the supply stays within +/- 5% of what the motor is rated for, you can do this.
Yes. It will make your motor a little faster though, so it depends on what you are powering with this motor. IE Can the piece of eguipment be ran faster?
Not advisable, the voltage differential is too great.
It is an extremely expensive way of utilizing the deep fat fryer. You should look into changing the heating coils in the fryer to utilize the new voltage. That said it can be done.
It will not work at all.
3 phase reverse relay can be utilized to control 480V motor 60HZ for controlling their speedspeed.
One way would be to hook it up to a supply (by itself, with no load) and measure the speed with a contact tachometer. If your supply is 60Hz, and the motor speed corresponded to one of the standard motor speeds, it would be a pretty safe bet you had a 60Hz motor. If the speed was about 20% faster than a standard speed, the motor is probably a 50Hz motor. Or 20% slower if you were running a 60Hz motor on 50Hz For instance, a 1750 RPM 50Hz motor would spin at about 2100 RPM if you ran it on 60Hz.
Yes. It will make your motor a little faster though, so it depends on what you are powering with this motor. IE Can the piece of eguipment be ran faster?
It will probably run but not correctly. Low voltage will cause the motor to draw less amps than it's designed to. It will not reach its rated RPMs and such slow operation may shorten its operating life.
This should not be a problem but check with the manufacturer of the laundry equipment to be certain.
What effect will be there on the motor (Induction) output power when a 100kW 50hz motor is connected to a 60hz power supply.