Touch the + and - terminals to a small wire for a second and you'll find out. Or just put a quarter on the terminals then touch the quarter...it'll get pretty warm.
no ONE Wires tHat ConDuCts Heat
can 6 ,12 volt battery be wire to make in to one 24 volt battery for solar use in home
If you have two 6 volt batteries you can take a jumper wire and connect the negative post on one battery to the positive post on the other battery then connect the remaining pos and neg posts to the 12 volt battery charger.
If you are referring to the main battery cable use 00 guage cable.
To get 24 volts from two 12 volt batteries, hook the positive post from one battery to the negative post of the other.
The wire will heat up and melt and the battery may be damged.
The wire size depends on how much current it will conduct.
24 volts (although you'll ruin the 12v battery this way). If you're trying to get 36 volts, you want to wire them in series.
You will need two 6 volt batteries to do this. Attach a jumper wire from the negative post on one battery to the positive post on the other. Connect the remaining pos and neg posts to the battery charger.
To conduct the flow of electrons/electricity from the battery to the bulb and back.
Yes, any metal is a good conductor of heat. However, the wire being fairly thin, it won't conduct much heat.Yes, any metal is a good conductor of heat. However, the wire being fairly thin, it won't conduct much heat.Yes, any metal is a good conductor of heat. However, the wire being fairly thin, it won't conduct much heat.Yes, any metal is a good conductor of heat. However, the wire being fairly thin, it won't conduct much heat.
To use two 12 volt batteries in a 24 volt system they must be wired in series. For this explanation I will refer to them as battery #1 and battery #2. This answer describes the wire connections for a vehicle with a negative ground electrical system. The cable from battery#1 Negative terminal connects to ground (Frame or engine block). The cable from battery#1 Positive terminal connects to Battery #2 Negative terminal. The cable from battery#2 Positive terminal connects to Starter solenoid.