Want this question answered?
Distributor pickup coil resistance 140-180 ohms.
hey are located inside the distributor and function as the trigger for the ignition system to produce spark. The pickup coil monitors the rotation
You need to replace the Distributor cap and rotor. Could have a bad coil are coil wire too.
No input voltage to the coil or the coil is bad. Check the distributor for issues and the wires.
Remove Distributor,remove drive gear,remove shaft,remove pickup coil.
If it has a distributor, it might be the pickup inside the distributor.
The pickup coil in the distributor? !976 should be an HEI distributor. Take the cap off, unplug the wires going to the distributor, remove the rotor and the pickup coil is under the rotor and held in place with two screws.
Check the pickup inside the distributor and see if its OK. Do you have spark at the ignition coil? Check the wires. Or the cap and rotor assy.
The B2600i does not have a pickup coil, it uses a hall effect sensor located inside the distributor to trigger spark. K6 Mazdatruckin.com
It is inside the distributor and is more commonly known as a distributor pickup, HEI pickup, pickup coil, hall switch, or hall effect sensor. I hope that helps.
Bad coil? Bad distributor cap? Bad distributor rotor?
The coil charges with electricity, and as the reluctor hits the high point, it releases all the energy at once.