0
Can a magazine latch from a later model Remington rifle be substituted for the original from a Remington 740?
Wiki User
∙ 15y ago
If you are referring to the magazine latch style from the Remington Model 7400, yes it can be used on the Remington Model 740, but you'll also need to use the spring that goes with the newer style. These latches (newer style) are available in varying heights numbering from 0 thru 5 so you'll need to make sure the right height/size is chosen to get correct cartridge feed in your rifle.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Install a complete magazine latch on a Remington Model 51?
i cant get the mag release back in ?how does it go in?
Where can you get a magazine for a 30-06 Remington 740 serial 20xxx if the new ones do not latch properly?
I have the same problem with my 740. Although I am fairly certain that its because the tip of the magazine latch broke off.
How can you order a magazine latch for your model 710 Remington?
I've just got this problem this morning myself. I called some gunsmiths and they said you have to send it in to Remington.
Does adl have anything to do with a rifles magazine?
You would need to tell us what adl is. I do not recognize the initials as having any meaning in firearms. I believe that this individual is talking about the Remington model 700.They were made as a model 700ADL(blind magazine that had to be unloaded by operating the bolt to unload the magazine) and the model 700 BDL which had a drop latch that could be opened and the magazine unloaded,except for the shell in the chamber.
How do you load a 22 cal magazine tube?
Depends on how it's set up. In a traditional configuration, where the tubular magazine is under the barrel, there'll typically be a cap at the end of the magazine. Rotate it counterclockwise, and pull it out. Attached to it will be a long tube and the magazine spring, and this action will open the magazine for reloading. On some rifles, such as the tubular mag fed versions of the Remington Nylon 66, the magazine inserts into the back of the buttstock. You will again need to rotate the latch counterclockwise until it unlocks, then remove the magazine.
How do you take off the magazine from a model 80 bernardelli pistol?
Most of the small Bernadelli pistols use a magazine latch at the bottom rear of the magazine. This will be slightly rounded with grooves in it. WITH YOUR FINGER OFF THE TRIGGER, pull back on the magazine latch, and pull down on the magazine. If you are not comfortable with guns, please put it in a box, and take it to a gunsmith. You will NOT be the first person to bring him a gun like that.
How do you replace a hood latch on a 1995 F150?
To replace a hood latch on a 1995 F-150, the old hood latch will have to be cut out with a blow torch. The new hood latch will have to be welded in place. Securing with bolts after welding will make the hood latch stronger than that of the original.
Do the original 1966 Chevelle bucket seats have a latch on inter and outer seat tracks?
No, just on the outer side.
What is Difference between static and dynamic latch?
static latch: a latch without capacitor dynamic latch: latch with capacitor
How do you remove bolt from 551 remington 22 rifle?
Retract the bolt action to it's furthest open position. Pull the trigger which will release the bolt retaining latch, allowing the bolt to be removed from the rifle.
How do you repair the center console latch in a 2001 suburban?
i removed the latch assembly from the console lid then gently removed the latch itself from the assembly, then with some wire and paper clips joined the pieces of the latch together. then i purchased some clear potting/encapsulating compound from the local electronics store, made up a rig from a coat hanger and immersed the broken end of the latch into the compound (time spent making the support rig is well spent). after the compound set with a little time and a hobby die grinder i carved the latch to almost its original shape reassembled it and it works fine... good luck...
What is latch?
a latch is like a lock
