Want this question answered?
This is different for different metals.
The heat number refers to a heat lot quantity of steel. This number follows the steel through the production process. Each heat lot is assigned a specific heat number and it is specific for the grade of steel and the production mill. The heat number is not specific to a certain size of steel. Many sizes could be rolled from the same heat number, but usually will have some sort of suffix added to the heat number (e.g. P78323-2 where P78323 may refer to M-4 high speed steel and 2 refers to the second size produced from that heat.) The next time that this grade and size is produced it will have a different heat number and suffix.
Standard pipes can be made of copper, steel, lead, polyurethane, and other materials.It would depend on what the pipe is made of.It would also depend on the thickness of the walls of the pipe."Standard" is also ambiguous since different applications have different standards. A gas pipe is different than a sewage pipe or a fresh water pipe.
Conservation of what? There are several conservation laws.
Heat it up
This is different for different metals.
Pressure rises in the tube.
It is a number that allows the pipe to be traced all the way back to the metal it was made from, important for quality control.
Heat pipe collectors must be mounted with a minimum tilt angle of around 25° in order for the internal fluid of the heat pipe to return to the hot absorber.
The heat number refers to a heat lot quantity of steel. This number follows the steel through the production process. Each heat lot is assigned a specific heat number and it is specific for the grade of steel and the production mill. The heat number is not specific to a certain size of steel. Many sizes could be rolled from the same heat number, but usually will have some sort of suffix added to the heat number (e.g. P78323-2 where P78323 may refer to M-4 high speed steel and 2 refers to the second size produced from that heat.) The next time that this grade and size is produced it will have a different heat number and suffix.
First off, you should shut off the water source. Then you must drain the pipe. After that you can clean up the area to be soldered, apply some flux. Now you are ready to solder. The pipe doesn't need to be bone dry, since it will dry as you solder from the heat.
Try wrapping the pipe in tin foil as this keeps the heat in. If not, try cutting styrofoam into the shape of the pipe and attaching it to it, keeping it together with electrical tape.
Used for inspection. Heat numbers make it possible to trace pipe from spools fabricated on a job to material documentation from a given melt. The matching documents will tell when and where the pipe was made, the material used and the pipe grade etc.
you have first to know the thermal conductivity of PPR that you are dealing with. normally, this is in range between 0.1 to 0.24 W/MK .then you apply this formula Q(IN WATTS) =Thermal Conductivity/MK)*A( surface area for the pipe M2 )temperature difference between fluid inside pipe and temprture of pipe surface K)/(thickness of the pipe M)
Pipe n tube are same in shape etc. BUT only difference is Pipe is used for Transferring Material (Gas, Liquid etc.) AND where it is used for Heat Exchanging purpose , It is called TUBE.
**** you.......... pls somebody answer Double pipe heat exchanger consists of two concentric pipes of different diameters.One pipe is for hot fluid and another is for cold fluid.Both may have same flow direction(COCURRENT) and opposite direction(COUNTERCURRENT). Shell and tube heat exchanger consists of a shell in which large number of parallel tubes are present.One fluid hot or cold flow in shell and other hot or cold flow in the tubes. Also in case of shell & tube(S&T) the hot fluid will have more turbulence than in double pipe heat exchanger (HE) since there are no of tubes within a shell the area for convective heat transfer is considerably increased. so these are much more preferredTherefore the rate of heat transfer is greater in shell and tube because large surface area and enough contacting time
Only apply thread sealant to the MALE threads of the pipe.