0
What else can I help you with?
A system has 220v ac L and neutral can be possible two hot leg 120v ac be used?
yes, but the two 120v legs would have to come from breakers that are on the two different bus bars in the panel box, otherwise, you will get zero voltage between the two hot wires and 120 volts to neutral.
Can you use 220v or 120v appliances in the UK?
UK is 220v
Can 120V appliance work with 220V?
120V appliance will not work on 220V. Use an instrument transformer or voltage regulator to adjust the high voltage to the desired level.
How do you get 120v from 220v socket?
You don't, at least, not legally.
How do you change over so you can plug a 120V RV plug into a 240V single-phase twist-lock receptacle?
Is the 220V plug 220V only or 110/220V? (The former will have 3 prongs and the former will have 4) If your case is the latter just use the ground, neutral, and one of the hots. This will give you 120V single phase. If the case is the former you can't get 110V off that plug.
Will a 220v 50hz inverter work on 120v 60hz?
No, 120 v is not enough.
Does Brazil runs at 120v or 220v?
Brazil has a nominal voltage of 220/380V.
Can you use 120V lamps in Europe by just putting in a 240V bulb and a European adapter on the plug?
If all the components are rated to 220V, yes. Keep in mind that if the appliance was designed for 110V it may arc if 220 is run through it. If you don't know the device can handle 220V, don't run it at 220V. Chances are it was manufactured cleaply and cannot handle the extra voltage.
What kind of transformer for going from 120v to 220v?
This type of a transformer is known as a step up transformer.
How do you rewire a 220v lamp for 120v?
To rewire a 220V lamp for 120V, you will need to replace the existing 220V bulb with a 120V bulb that is compatible with the lamp's socket. Next, you will need to install a 120V compatible power cord that matches the voltage requirements of the lamp. It's important to refer to the lamp's manual or consult with a professional electrician to ensure the rewiring is done correctly and safely.
What should be the primisable voltage between neutral and earth in a three phase system?
It is the line to line voltage divided by 1.73. 600V / 1.73 = 347V 480V / 1.73 = 277V 380V / 1.73 = 220V 208V / 1.73 = 120V
What is cheaper to operate 120v motor or 220v same horsepower?
220 volt will use less energy.
