yes use carbide blade
The motorised Mitre saw can cut materials at very exact angles.
You place to object you are about to cut inside the miter box, hold it against either the front or back of the box. place the saw in theGroves that line up directly across the box and start sawing.
30
cut it rreal good
You will need a radial arm saw or a stady hand with a skill saw for that cut.
Rip, cross, dado & "sink".Table saw cuts include rip cuts, crosscuts, miter box cuts and bevel cuts.A rip cut is a cut made parallel to the wood grain.A crosscut is generally at a fixed 90 degree angle.A miter cut involves a table saw with a miter gauge. A table saw with a miter gauge has one or two slots or grooves running from the front to the back of the table. These slots or grooves are used to position and guide the miter gauge or crosscut fence to set the miter cut at a precise angle. With this cut, the material being cut is angled versus the blade.Bevels are cut by changing the angle of the blade with respect to the surface of the wood on the table.
miter
A compound miter saw can cut two angles at the same time. Very useful when cutting crown molding.
In mitering the pieces that form the angles of an octagon, the miter saw should be set at 22-1/2 degrees.
A 45 degree cut.
if you are using a table top wooden miterbox for cutting the most frequent problem here is precission-- If you are using a compound mitre saw your chances for accuracy are greater.
The miter gauge is used to mark a straight line on any suface of wood making it easier for the carpenter or worker to cut a straight line.