0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why do we need a transformer if we use a welding machine?
A welder requires high current at the expense of voltage, The transformer reduces the voltage allowing a higher current to operate the welsing machine.
What size breaker is required for a 230v 180 amp craftsman arc welder?
maybe 10 amperes
Is it possible for a power transformer to have an arc fault between the primary terminal and its metal enclosure?
Sure. No transformer is built to last forever. Aging and operations will weaken the insulation with time.
What is the application of pluse transformer?
why should we use pulse transformer rather than ordinary transformer
Where is the use of earth transformer?
It is used in where the transformer are connected in star delta.
How you can use your 110v arc welder on 220v country?
You will need a 'step up transformer' but it is important to provide the details on the information panel of the welder before ordering
What is the difference between an arc welder and a stick welder?
Stick welding is also more difficult to learn and use, particularly the ability to strike and maintain an arc. Arc welders are available in AC, DC or AC/DC, with AC being the most economical. It's used for welding thicker metals of 1/16 inch or greater.
What is the proper ampere rating of circuit breaker for electric arc welder?
The proper ampere rating of a circuit breaker for an electric arc welder depends on the arc welder. Each is different. Look at the nameplate on the arc welder and choose the circuit breaker and wiring accordingly.
What does a arc welder do?
it welds
What is the temp of an arc welder?
4500to6000 celsius
Is there any copper inside an arc welder?
Like any mechanical tool, machine or similar engineering equipment, an arc welder will have lots of different materials inside it. An arc welder is an electrical machine and any electrical machine must have wiring inside it. Most electrical wiring will be made of Copper. So yes, there is likely to be some Copper inside an arc welder.
Why do we need a transformer if we use a welding machine?
A welder requires high current at the expense of voltage, The transformer reduces the voltage allowing a higher current to operate the welsing machine.
What type of oil is used for cooling arc welding machine coil?
which oil use for arc welding machine
What is the best welder to use for a go kart?
Depends on a lot of things. Slickest work, but most expensive - TIG. Cheapest - arc (stick) welder. Reasonably user friendly and inexpensive - wire-feed arc/ MIG welder.) Most versatile - Oxyacetylene. Oxy will give have the biggest heat affected zone and is the hardest to use (IMO). If your kart is really thin wall tubing you can forget about the stick welder and even the MIG will be quite tricky.
What is for MMA welder?
s.m.a.w. shielded metal arc welding
An arc welder provides 250 A of current when operating with a voltage of 40 V what is the power dissipated by this welder?
10,000 Watts
What tool do a welder use?
There are several tools which are used by welders. Some tools include a cutting torch, helmet, AC Arc welder, and metal cutting tools.
