Not if they are struts - need a spring compressor
The 92' Miata, (also known as a MX-5), has a Strut Assembly in the rear suspension. It consist of a Shock, Coil Spring, and a Strut Mount.
The shocks will be Bilsteins if it has the sports suspension.
remove the panels in the boot across the back and you will se them behind there
Hello, the timing belt has to be changed after 90.000 to 100.000 kilometers
The camshaft position sensor on a Mazda Miata is changed by disconnecting the wiring harness and unscrewing the sensor using a wrench. The threads can then be cleaned and a new sensor torqued into place.
I used this guide when I changed the clutch in my 97. http://www.miata.net/garage/clutch2.html
STO stands for Special Touring Option it was a limited edition thing and they only made 1500
Will a 1992 mazda miata hardtop fit a 2000 mazda miata?
The width of the Mazda Miata has changed over the years, as the styling of the car has changed. The first generation, which was produced 1989-1997, has a width of 65.9 inches (approx. 5.5 feet). The second generation, which was produced 1998-2005 had two different body widths as the years went by. The 1998-2002 Miata is 66 inches wide (also about 5.5 feet), while the 2003-2005 Miata differs by just a tenth of an inch, measuring 66.1 inches wide. The third generation, which began production in 2006 and is still being produced measures 67.7 inches wide (which is pushing 6 feet).
The oil change usually helps quiet the lifter noise. You could replace all 16 hydraulic lifters if it really bothers you. Most Miata owners just live with it. Try 10W/30 oil.
yes, the Mazda miata is rear wheel drive
92 mazda miata not pulsation in the injectors