Yes you can, but You might get damage your receiver.
The power rating of speakers has nothing specific to do with ohms. look at the Watts rating printed somewhere on the speakers
Any speaker that has a RMS power rating (not peak or PMPO) of at least 100 watts, plus a subwoofer rated at a minimum of 200 watts should be sufficient.
Honestly, it depends on the durabuility of the speaker. Most likely not, but I would definetly not take the chance! Soory
It depends on the power rating of the speakers. There is insufficient information in the question to properly answer it. Please restate the question.
50 watts is a good amplifier size for use in the house. For other applications speakers usually have a power rating.
The mathematical formula to solve this is P= I x R In other owrds the amps x the voltage = watts. 2.2 amps x 120 volts = 264 watts
Speakers are measured in Ohms not Watts. Watts is the amount of power you will be supplying to the speakers. In my 2009 Corolla the speakers can handle at least 400 Watts as this is what my OEM JBL system is pushing.
They will work OK. When a speaker is rated at 250 W that is only a maximum and speakers will work will less audio power. Putting two speakers in parallel will double the total audio power output for a given volume setting.
On the contrary, they increase. My speakers were advertised at 750 Watts at time of purchase. However, a recent test at home measured it out to 1000 and increasing... Source: Many of my own speakers. <><><><><> Another answer: The advertised power rating is the design power rating. Often, there is margin, but that should not be counted on. Exceeding the rated power rating can damage the speakers. Also, power rating is based on all frequencies. Testing at one frequency is not the same as looking at the spectrum.
They will work OK. When a speaker is rated at 250 W that is only a maximum and speakers will work will less audio power. Putting two speakers in parallel will double the total audio power output for a given volume setting.
Any receiver with regular speaker outputs and a power rating of 10 to 450 watts per channel will work. The active equalizer included with the 901s is optional and is designed for amplifiers with RCA tape loop or preamp out/ power amp input connections.
No they don't.