answersLogoWhite

0

if it matches the current rating.... then no problem.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Why does a fuse pop when the ac gets turned on?

usually it's down to a short circuit, wires touching etc. or the fuse could be under rated.


When you turn the air on in the car it blows the fuse why?

this is because you have a short in either the the ac circuit or the fan/blower circuit. You'll know know which one by turning the fan on without the ac, and if it doesn't blow the fuse then you know it's the ac circuit.


Can you use a ac fuse for dc?

No, it is not recommended to use an AC fuse for DC applications. AC fuses are designed to handle the characteristics of an alternating current flow, whereas DC fuses are designed specifically to handle the unique challenges posed by direct current. Using an AC fuse for DC applications can lead to safety hazards and may not provide the necessary protection for the circuit.


What is a relay circuit in a ford fuse box?

the relay for the ac is located on the right side engine fuse box and in the top row


What could be the cause of a blown AC fuse in my system?

A blown AC fuse in your system could be caused by an electrical overload, a short circuit, or a faulty component in the air conditioning unit.


How can someone tell if an ac relay fuse is blown?

A relay does not have a fuse. The circuit for the particular relay is fused. You can tell if the fuse is blown by testing it with an ohm meter.


Why does my AC keep blowing a fuse?

Your AC may keep blowing a fuse due to an electrical overload, a short circuit, or a faulty component within the system. It is important to have a professional inspect and repair the AC to prevent further damage.


Why would plugging in an Air Conditioning unit in a wall receptacle blow a fuse?

The fuse (or circuit breaker) rating has been exceeded. I'm assuming you do NOT have the AC unit connected to a dedicated circuit. Lets say you have a 15 amp circuit breaker and the AC unit draws 12 amps and other items on the same circuit draw an additional 5 amps. The total amp draw of 17 amps exceeds the circuit design capacity; so the breaker trips to prevent an electrical fire. If you have old style fuses, NEVER EVER replace a fuse with a higher rated one! I'm sure you'd have problems with your homeowners insurance paying out when your house burns down. Have an electrician run a new dedicated circuit for the AC unit and you should be good to go.


Where is the AC fuse on the 2004 Sienna?

The fuse for your ac is under the hood of the car. look for a black panel on right side and on top will so a diagram. Remove cover and use diagram to find what fuse under cover is ac fuse.


Can you use a MDL for MDA fuse?

Depends on the voltage across the fuse. For fuses rated below 9 amps, the two types are almost identical (MDL has slightly lower AC Interrupting amperages), and both are rated for use up to 250V. For fuses rated above 9 amps, the MDL fuses are rated for use up to 32V, while the MDA fuses are rated for use up to 250V. More info on Cooper Bussmann (link below).


Why link is provided as neutral in an ac circuit?

link is provided in neutral path of ac supply because it should provide a path for unbalanced currents , if we use fuse ,fuse may blow of and damage the entire system and also unbalanced currents may be more than the fuse rating


Is there a fuse to the fan blower?

All electrical circuits in a vehicle have a fuse or circuit breaker somewhere. There are possibly three in the Taurus AC circuit plus a fan relay, a fan speed control module, and a climate control computer.