no because if your tank leaks it is wrecked
There is no OBD II connection on a 1994. It's only on 1996 vehcles and up. 1994 would be OBD I.
Does it work only when you push the buttonNO That's the problem it only works once in awhile when you push the button
I have the same problem with my 1994 F150 except it will shift down from overdrive...let me know if you get an answer..dcfrisbie@gmail.com I have a 1994 ford F150 which was doing the same thing...ended up being the throttle position sensor...Drives like a new truck after new one was installed....
The first thing that you need to check will be the vacuum hoses for leaks, breaks or loose fitting ones.....
YOU ONLY HAVE TO REMOVE THE OIL PAN.
You remove the radiator cap (on a cool engine only) and pour it in....
There should not be a restrictor on a 1994 year model, I'm sure the only ones that have it are the ones between 1990 & 1993.
The only tool that is really needed to remove the distributer cap off of 1994 Mazda Protege is a screwdriver. Using this tool will enable you to loosen the cap, and then you can remove it.
Only if it leaks toxic chemicals.
I dont have a F150, but in my old 95 contour, it was under the cowl (where the hood meets near the windshield). I had to remove a cover, then pop open some clips to pull the filter housing out. There might be another (or the only one) under the dash on the passenger side.
Door Panels Removal & Installation 1. Remove the sail panel (Front Doors Only). 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. Remove / Repair Speakers. The installation is the reverse of the removal.
Replacing a door panel in a 1988 Ford F 150 is very simple to do. The only tool needed to remove the door panel is a Phillips screwdriver. You will need to unscrew the screws on the door panel only to remove. It should take less than 10 minutes.