0
What else can I help you with?
Will mark 4 golf wheels fit a mark 5 golf?
Mark 4 golf wheels may not be a direct fit for a Mark 5 Golf due to differences in design, offset, and bolt patterns. It's essential to check the specifications of both models to determine compatibility. Additionally, using adapters might be an option, but this can affect performance and safety. Always consult a professional or refer to manufacturer guidelines for the best fit.
What size alloys wheels will fit on a mark 4 golf?
Alloy wheel sizes that will fit a Mark 4 Golf typically range from 15 inches to 18 inches in diameter. It's important to consider the offset, width, and bolt pattern compatibility when choosing alloy wheels to ensure proper fitment and performance. Always consult with a professional or refer to the vehicle's manual for specific recommendations.
Does the vw golf gti mark 6 tires fit the vw golf gti mark 5?
Yes, the tires from the VW Golf GTI Mark 6 can fit the VW Golf GTI Mark 5, as both models typically use a similar tire size, often 225/40 R18 or 225/45 R17, depending on the specific trim and wheel options. However, it's essential to ensure that the wheels themselves are compatible, as the offset and bolt pattern should match to avoid any fitting issues. Always check the specifications for both models before making a swap.
Do golf mk2 gti bumpers fit golf mk3?
No, Golf MK2 GTI bumpers do not fit Golf MK3 models. The dimensions and mounting points of the bumpers are different between the two generations, making them incompatible. However, some enthusiasts may modify or adapt parts for a custom fit, but this would require additional work.
Will golf mk4 alloys fit a mk3 golf?
yes as long as they are the same stud fitment. The mk4 golf is 5x100 bolt pattern and the mk3 golf is 4x100. unless it's a vr6 model which has the 5x100 bolt pattern so in general the mk4 wheels will not fit a mk 3.
Do mk4 golf wheels fit a mk5?
MK4 Golf wheels can fit a MK5 Golf, but there are a few considerations to keep in mind. Both models typically have a 5x100 bolt pattern, which is compatible, but you should check the offset and width of the wheels to ensure proper fitment and avoid issues with rubbing or clearance. Additionally, the hub size may differ, so using hub-centric rings might be necessary for a snug fit. Always verify specifications before making the switch.
Can you fit the wheels from 98 cobra mustang to 94 mark viii?
Bolt pattern is different, you have to change the hubs.
Will Honda rims with a 4x100 pattern bolt onto a 96 VW golf?
factory Honda wheels won't fit. the center hole is too small.
Do 17 wheels fit a corsa?
NO! 17 wheels do NOT fit a corsa
Are wheels with teeth that fit together?
Gears are wheels with teeth that fit together.
What wheels will directly bolt onto a 90 Mark VII LSC?
Its kind of a toss up as to what wheels will fit a mark vii although we have 5 stud hubs and axles the problem lies in the front hub and bearing. Most new model fords SN-95 or newer have the hub machined at a 45 degree angle. The problem with most wheels is that the hub sticks to far out without being machined. The second problem is that if you find wheels that fit or machine the hub the center ca[s for the wheels most likely wont fit because of the endcap for the bearing assembly. Machining the rotors are not that difficult i did it in my drive way with a 5 in die grinder. I have 99-04 mustang bullitt wheels on my mark. good luck
Can Corvette wheels fit an El Camino?
The corvette style wheels will fit on any elcamino if they are older style rally wheels.
