Yes, you can if you are sure you need to.
It will work over another latex paint, however it won't be as scrubable as a normal top coat, and it won't adhere as well as a paint over a primer. Better to apply the primer, then the paint. If the surface is clean and deglossed though, you really don't need a primer and can coat the surface with a quality wall paint.
# Sand it # Apply primer # Paint it # Apply varnish
Absolutly! You just have to check to see if the primer is first an exterior primer and if it will stick to glossy surfaces. You can lightly sand to rough up the surface or just clean the surface and apply the primer. For oil based primers I would recommend Beauti-tone's fast dry oil primer or Zinsser's oil based cover stain primer.
Try a heavy coat of primer/sealer. The primer should condition and adhere to your plaster walls. Once the primer sets up (dries) you can then apply anything you want to those walls.
Rustoleum makes a metal primer specifically for this purpose. Then, apply their paint over the top. Black looks especially good on wrought iron.
Primer is a base coat that can accept all types of paint so no stripping is necessary and you can definitely primer over primer but remember to fill and sand before to eliminate blemishes and maintain a smooth finish.
It will work over another latex paint, however it won't be as scrubable as a normal top coat, and it won't adhere as well as a paint over a primer. Better to apply the primer, then the paint. If the surface is clean and deglossed though, you really don't need a primer and can coat the surface with a quality wall paint.
First, clean the tile and grout with a harsh cleanser such as T.S.P. Next, apply a bonding primer to the tile with a brush or roller. It can be oil-based or water-based, and you can thin it slightly if needed to get a smooth, even coating. Once the primer is dry, apply your alkyd (oil-based) paint over the primer with brush or roller.
# Sand it # Apply primer # Paint it # Apply varnish
over pressure in the catridge. this is really unsafe . stop shooting the ammo now !!!! are these handloads or factory loads. if factory contact maker now.
You'll need to paint over it. Use a good primer-Kilz is a good one. Follow the instructions for applying the primer. Then apply a new coat of paint.
a factory lever
Absolutly! You just have to check to see if the primer is first an exterior primer and if it will stick to glossy surfaces. You can lightly sand to rough up the surface or just clean the surface and apply the primer. For oil based primers I would recommend Beauti-tone's fast dry oil primer or Zinsser's oil based cover stain primer.
Yes. Clean and degloss the oil based paint, apply an oil based primer, then apply the water based paint.
Yes. Clean and degloss the oil based paint, apply an oil based primer, then apply the water based paint.
Try a heavy coat of primer/sealer. The primer should condition and adhere to your plaster walls. Once the primer sets up (dries) you can then apply anything you want to those walls.
Eye primer is is a type of cosmetic used to prime of coat the eyelid before eyeshadow is applied. The way to use eye primer is to apply a dab using a dry, clean finger or a sponge and blend in from the lash line to the brow line.