0
What else can I help you with?
Changing power steering pump on a 1997 Chevy S10?
You will need to buy or rent or borrow a power steering pulley puller. Trying to remove and replace the pulley without the correct puller will surely damage the pulley and or the pump.
About to change out the upper and lower manifold gaskets How did you break the bolt loose holding the power steering pulley?
On my 99 Suburban, You have to rent or buy a puller for the power steering pump pulley.
How do you remove the pulley to remove the power steering pump on a 1992 Chevy blazer s-10?
With a power steering pulley puller. Your local auto parts store should have one you can rent or buy.
How do you re-install the pulley on the power steering pump on a 1999 350 suburban?
u need to buy a tool caled a power steering pump pulley removal amd installation kit i t will come with instructions on use most parts stores should carry these
How do you remove the pulley on the power steering pump on a Ford Windstar?
You need a special pulley removal tool. And you will also need a special tool to reinstall the pulley. You might be able to buy one at your local parts store.
Where can you buy a v-belt pulley for the power steering pump of a 1994 Jeep Wrangler?
IF THE DEALERSHIP CANT HELP TRY EBAY BUT TRY DIFFERENT SEARCH WORDS SUCH AS WATER PUMP PULLEY IF ALL ELSE FAILS TRY QUADRATEC.COM
How do you change the power steering pump on a 2000 Malibu?
Your best bet is to buy a Haynes Manual that is for your car. While you are at it you will need a power steering pulley puller and installer.
How do you remove a Power steering pump on a 77 Chevy pickup whit a 350?
Yea... that's a unique problem. There is a special puller that's used to remove the power steering pump pulley. You can usually borrow, rent or buy the puller from most auto parts retailers. After the pulley is off you can get to the bolts.
How do you remove the pulley from the power steering pump of a 1994 ford thunderbird 38?
Rent or buy power steering puller/installer from parts store. you will need to make sure it is a REMOVER and INSTALLER
How do you tighten a power steering pulley for a 1996 Chevy Pick Up?
The pulley is a press fit. If it no longer fits tight you need to replace it with a new one. This procedure requires special tools to remove and install the pulley to the pump. Some auto parts stores will rent the tools you need to do the job if you buy the parts from them.
1972 nova with a 454 long water pump and power steering and crank pulley is 7.75 in dia and you need a smaller dia pulley for more clearance what do you need?
you can buy smaller pulleys and they are called underdrive pulleys, check out summitracing.com.
How do I remove pulley that blocks water pump bolt?
The year, make, model and engine info would be helpful but, if that pulley is attached to the power steering pump, you may need to buy, rent or borrow a puller designed just for the job. Many auto parts stores wil rent you one.
