answersLogoWhite

0

The year, make, model and engine info would be helpful but, if that pulley is attached to the Power Steering pump, you may need to buy, rent or borrow a puller designed just for the job. Many auto parts stores wil rent you one.

User Avatar

Wiki User

9y ago

What else can I help you with?

Related Questions

How do you remove engine crank pulley 1998 jetta?

Loosen the 18mm bolt about 4 or 5 mm and give the bolt a good wack and the pulley should pop. Then remove the bolt and pulley.


You need to remove the power steering pump Do you remove pulleypumpbracket first then try and get pulley off repair manual says remove pulley first but removal tool too long to fit.?

There is a bolt that is blocked by the pulley. In order to remove the pump you need to remove that bolt. So you need to remove the pulley first to get access to that bolt.


How do you remove power steering pulley 1995 suburban How do you lock the pulley in place to remove Allen bolt?

It requires a special puller to remove the pulley. There is NO bolt are Allen head that has to be removed. The pulley is pressed on. You will also have to get a special tool to put the pulley back on too.


How do you replace the idler pulley on a 1997 dodge caravan?

Remove the belt, then remove the bolt holding in the idler pulley.


How do you get the water pump bolt that is behind the pulley for the power steering pump loose when all other bolts are out and you pulled a muscle trying to get the pulley off?

You need to remove the entire power steering pump. There are two bolts holding it on at the 12 and 6 o'clock position. Remove these via the holes in the power steering pump pulley. (no need to remove the pulley) Push the pump to the side and you then have access to the water pump bolt. Hope this helps. "G"


How do you put a pulley on a tensioner in a 1998 dodge caravan?

You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.


How do you change an idler pulley on a 2000 Ford Mustang?

Take off belt, remove bolt in center of pulley, replace with new pulley (comes with bearing). Reverse to install Take off belt, remove bolt in center of pulley, replace with new pulley (comes with bearing).


How do you remove the crank pulley on Mitsubishi 3.0 v-6?

remove all belts,tensioners etc, remove pulley bolt, use HARMONIC BALENCER PULLEY to remove - DO NOT USE NORMAL PULLEY REMOVER - must be pulled from center of pulley not from outer edge


How do you remove damper pulley on 91 Saturn SL?

Just remove the bolt holding it on.


What do you do if pulley wheel bolt is broken on a Honda Prelude?

Depends on which pulley but most have several bolts holding them on. You can remove the broken bolt or simply not worry about it.


How do you remove the idler pulley for a 3.8 liter?

Should only be one bolt in the middle of the pulley that releases it.


How do you remove 94 Ford Ranger alternator pulley?

Use an impact wrench to remove center bolt and pulley should slide off