There is a bolt that is blocked by the pulley. In order to remove the pump you need to remove that bolt. So you need to remove the pulley first to get access to that bolt.
Yes. you will have to replace the manual steering box with a power steering box, install a power steering pump and lines and possibly a main pulley on the crank to run the belt for the power steering pump if your car doesn't have the right pulley.
The pulley needs to be removed before you can extract the pump, you can get the pulley removal tool at a car parts store.
it takes a special tool You can probally rent the power steering pulley removal tool from auto zone are any other reliable parts house. You will also need the tool to re-install the pulley.
The power steering pulley requires a special puller to remove and install the pulley. Many auto parts stores will sell or rent you the proper tool. Any attempt to remove the pulley without the special tools will probably damage the pulley and or the pump.
You need a special pulley removal tool. And you will also need a special tool to reinstall the pulley. You might be able to buy one at your local parts store.
Power steering usually powered by that pulley.
Your best bet is to buy a Haynes Manual that is for your car. While you are at it you will need a power steering pulley puller and installer.
There is usually a removal kit available for rent at most auto parts stores.
u need to buy a tool caled a power steering pump pulley removal amd installation kit i t will come with instructions on use most parts stores should carry these
Power steering pulley puller Snapon?
Take the drive belt off. Get a pulley removal tool and take the power steering pulley off. Disconnect hoses from the back of pump. Take support bracket off back of pump remove four bolts that are visible once you remove the pulley
That requires the use of a power steering pulley PULLER. ( A special tool ) The pulley is pressed on.