if you can replace it yourself but do it right look on the web for info vids
You will need to remove the exhaust manifold retaining bolts in your 1993 Chevy Astro. Remove the exhaust manifold. Remove the exhaust manifold gasket and clean the surface. Reverse the process to install the new exhaust manifold gasket.
there is one right below exhaust manifold and one right after the cat. they both have connectors and use and adjustable wrench should get the job done.
There are no tricks. It is part of the exhaust manifold.There are no tricks. It is part of the exhaust manifold.
To change the muffler or exhaust in a Chevy Venture, jack up the vehicle and locate the muffler. Spray penetrating oil on the nuts and loosen muffler clamps. Replace with new.
The exhaust manifold on a Chevy S10 truck is changed by removing the spark plugs, unbolting the manifold from the cylinder heads, and unbolting the collector. The manifold can then be removed from the vehicle and a new set put in its place.
What engine???????? You should refer to repair manual if not familiar with auto repair and understand the terminology before attempting Remove nuts holding exhaust manifold to cylinder head & remove nuts/bolts holding exhaust manifold to exhaust pipes Use new exhaust manifold gaskets and install the new manifold securing the manifold to cylinder head (may need to but new nuts and or bolts) by "snugly" tightening manifold to cylinder head if not refering to repair manual
The year, engine size and if it is the intake manifold or an exhaust manifold gaskets would help.
It is in the exhaust manifold next to the firewall.
Hey Mario==It will be close to the exhaust flange and on some cars it is in the exhaust manifold. GoodluckJoe
there is no gasket on the exhaust manifold. i have a 93 escort lx wagon and i have a leak somewhere and i looked at the exhaust diagram at my local napa and it doesnt show a gasket. * Not sure which diagram you were looking at but there is DEFINITELY a gasket... Look up exhaust manifold on any popular car site and you will clearly see one.
Its on the drivers side of the motor behind the exhaust manifold. Take the manifold cover off and you will be able to see it between the 3rd and 4th exhaust pipes on the side of the motor.
there is no upper intake gasket, only a front and rear