You can connect a printer using Ethernet if the printer has an ethernet jack. If not you can purchase a used HP Jet Direct box on E-Bay for $10, which has a parallel connector that works for older printers. The printer connects to the jet direct via parallel cable, then a CAT 5 (Ethernet) cable to a hub, switch or router.
If you are using Windows choose Add Printer , Local Printer attached to this computer, create new port, arrow down to TCP/IP port and type in the address from your router (192.168.1.X).
You have two basic options. 1.You can connect your laptop to your cable, fibre optic, or DSL modem or Ethernet port using an Ethernet cord. 2. You can connect your cable, fibre optic, or DSL modem or Ethernet port to a wireless router using a Ethernet cable. You then connect your laptop using wireless to your wireless router.
is it a straight ethernet or a crossover? i am using a Motorola SURFboard SB5120. You'll only need a straight ethernet cable for that.
If the wireless router is like mine then you also can make an ethernet connection with the PS3 using an ethernet cable
You can link up your PC to the CM100 by using an Ethernet cable or USB cord. Connect the Ethernet cable to the CM100 Linksys modem and the other to the Ethernet port on your computer or if you are using USB connect the USB cord to the USB port on the computer.
connect the cable modem to PC using the usb port, leaving you the ethernet porton on the cable modem to connect to the wireless router.
We can do so using an ethernet cable or through wifi(requires wifi adapter).
You would connect them with ethernet cables and 1 or more switches. If you require more than 1 switch, you need to connect the two switches with an ethernet cable too.
Find a Broadband or DSL internet provider or if you already have one and are already using it connect a router to your modem. Then simple connect an ethernet cable from your modem to your router and one from your router to your PS3. The cable that was going from the modem to your computer now goes from your router to your computer. If you are not using the internet service before then just connect th ethernet cable from your new modem to the PS3. Then if you do get a computer just buy the router and the ethernet cables then.
This depends on which printer you have.Some printers have a serial cable and the newer ons have a usb cable. You connect the cable to the computer at the back . Then reboot your computer. You then insert the driver CD into the computer and then install the drivers for that printer.
no you need WiFi from DSL or cable or an ethernet connection
solved (not what i meant tho i went to another website)
1. Dial-up - You use a dial-up modem in your computer to connect to the internet over a phone line. 2. Ethernet - You connect to a cable / DSL modem with an Ethernet cable, either directly to the modem or through a router. 3. Wi-fi - You connect to a cable / DSL modem with a wireless card to a router, which is connected to the modem. 4. USB - you connect to a cable / DSL modem directly with a USB cable. 5. 3G - A form of wireless internet that communicates using cellphone towers.