415V 3 phase is the line to line voltage. The line to neutral of this supply is 230V single phase. Therefore you use one of the phases and the neutral.
no
The single phase voltage in India is 230v when we check with the phase and the nutral single line
Va=volts x amps. The K stands for one thousand. So 1 Kva is one thousand watts. So 415v times 120a= 49,800 what's. You divide that by a thousand and you get 49.8. So it would be 49.8 Kva.
5 hp moto 1500 rpm 3 phase winding calculation
Well that is probably a very complicated circuit. You should just look for a Inverter with 220V single phase input and 415V three phase output. It should be that hard to find.
0.073 assuming 0.85 power factor
The single phase voltage in India is 230v when we check with the phase and the nutral single line
Va=volts x amps. The K stands for one thousand. So 1 Kva is one thousand watts. So 415v times 120a= 49,800 what's. You divide that by a thousand and you get 49.8. So it would be 49.8 Kva.
5 hp moto 1500 rpm 3 phase winding calculation
In India its 415V, 50Hz.
might be interested in having a look at this: Single-phase power through three-phase self-excited induction generator utilizing renewable energy resources by Goel, SK (Goel, Sandeep Kumar); Srivastava, A (Srivastava, Ajay) search for it online Regards, Bill
Theoretically, you could connect three identical lamps in star (wye) and connect this to the three line conductors. But as you asked how to connect a (single) 230-V lamp to the supply, then the answer is by using a step-down transformer.
In the supply industry it refers to circuits of below 1000 volts. Common voltages used are 120v, 208v, 230v, 240v, 277v, 400v, 415v, 480v.
15 amps X 415volts = 6225watts or 6.225Kw
Well that is probably a very complicated circuit. You should just look for a Inverter with 220V single phase input and 415V three phase output. It should be that hard to find.
0.073 assuming 0.85 power factor
The voltage of three phase is 415v and the colours are brown black and greyAnswerThe nominal line voltage is 400 V, and the nominal phase voltage is 230 V.
The line current would be the same if the motor were connected in delta. The current can be based on the rule of thumb which says 7 amps must be allowed for a 1-HP single-phase motor on 240 v. A 2.2 kW motor is three times as powerful, and on a three-phase supply of the same voltage (240/415) it would draw 7 amps.