0
Yes, we did it, but use a small drill and be careful because when it brakes thru it will squirt all the liquid out thru the hole.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is strut pressure?
pressure of a strut
How do you remove the strut rod on Ford Thunderbird?
AnswerFirst you have to relieve the spring pressure off the strut. Ounce the spring pressure is off remove th lower balljoint off the knuckle this is connected to the lower control arm.The strut goes through the control arm remove the nut on the end (21 mm) then go to the front of the car to the other end of the strut this is bigger nut loosen that one.Push the control arm towards the back of the car this will free the control arm from the strut.then pull the strut out of the front grommet.
Do you have to take the strut off to replace upper control arm on 96 thunderbird?
You do not have to remove the strut. You have to take the pressure off the spring. To do this put a jack under the lower control arm and lift until the spring compress's then under the hood on top of the strut is a nut remove the nut and then carefully and slowly let the jack down , this will relieve the pressure on the strut and spring alowing you to remove the control arm safely. And always use jack stands to support the car.
How do you change a strut bearing on your mk1 Renault clio?
remove the 22mm bolt at the top that holds the strut to the car DO NOT REMOVE THE 19MM NUT ON THE STRUT ITSELF UNLESS YOU HAVE USED A SPRING COMPRESSOR TO RELIEVE TENSION OF THE SPRING
How do you relieve the fuel pressure on a 1998 Dodge Avenger?
Remove the gas cap and that will relieve pressure in the tank. There is a Schroeder valve on the fuel injector rail. Use that to relieve pressure at the injectors.
What is an air drill?
An air drill is a drill driven by the elastic pressure of condensed air.
How To Replace VW Golf Hatch Strut?
Begin by compressing the strut spring with a spring compressor. Be very careful as the strut spring will be under hundreds of pounds of pressure. Remove the strut retaining bolts. Reverse the process to install your new strut.
How do dreams relieve stress?
Dreams help relieve stress by helping relieve the pressure that comes along.
Is it bad for a strut to stay fully compressed over a long period of time?
It doesn't matter to the strut where the spring pressure is and for how long.
What are contemporary practices?
This is a phrase that refers to the modern way of doing things. E.g. "The old way to cure a headache was to drill a small hole in the patients skull to relieve the pressure. The contemporary practice would be to take an Aspirin.
What is a term that means release from pressure?
To relieve
How do you replace struts on 2002 Ford Explorer?
The strut spring with a spring compressor. Be very careful as the strut spring will be under several hundred pounds of pressure. Remove the top and bottom strut retaining bolts. Reverse the process to install the new strut.
