Want this question answered?
it will get louder
2 1/8 hole drill
You can take a LONG steel pointed rod and punch out the baffles. The You don't have to remap or do anything. It sounds slightly louder..a nice sound and the throttle response increased from a ded stop. the baffles are not able to be removed since they're welded in place but you can drill them out or just punch through them.
take the baffles out drill the rivet out if mfg. with or take the bolts out.
Cut the pipe at the end of taper and pull it out. Best to remove the pipes from bike then place on bench. Remove fiberglass insulation as well from this site and grind the burrs off end.
Most Harley Davidson mufflers have "2" sets of baffles. one in the rear and one in the front close to the location where the muffler meets the head pipe. I have found the best wat to remove these is to remove the mufflers, stand them on end on a padded surface ) a few towels will do) and use a piece of galvanized plumbing pipe and a hammer and knock the baffles in until they are flat against the inside of the muffler. But, if you remove the baffles you will also need to increase the flow of gas to the valves or you will burn them out. The Vance and Hines Fuelpack or the Harley CD download ( dealer only) will do the trick. The bike will run so much better once you let it breath. Good Luck
function of baffles is to prevent swirling in agitation.
The cast of Lady Baffles and Detective Duck in Baffles Aids Cupid - 1915 includes: Max Asher as Detective Duck Billy Franey as Chief of Police Gale Henry as Lady Baffles
Not "Fat boy" but "Fat man'; "Fat man" had putonium, not uranium 235.
Silver Boy is the band Song is titled "Tomorrow"
The Fat Boy Chronicles was created in 2010.
Being Fat Sucks - 2012 Jump Drill 1-8 was released on: USA: 30 August 2012