Want this question answered?
You must replace it . Remove the 2 screewes that hold it to the distributor base and it will then slide out and the 90 degree rod will drop out of the bass plate hole as you are moving it. Then put the new 1 on and hook the vacuum hose to it.
Replace it.
You need to get the carb vent tube and install it. Just do a web search for samurai carb vent tube fix. It's right from Suzuki. Also take off the distributor cap and use a vacuum tester (squeeze kind) on the vacuum line going to the distributor. Look inside the bottom of the distributor as you work the tester and make sure the vacuum advance is moving and hasn't gotten stuck from sitting. While your at it this is a good time to remove the EGR and clean the intake tube behind it. After you restart use small (very) squirts of starting fluid around the vacuum lines. Listen for the motor to speed up temporarily. Fix all leaking vacuum lines! Very important for that carb to work well.
You can replace it. Or you get a plastic tank fix kit in AutoZone or Advance Auto Parts.
how do i fix leaking spray pump on a 2 barrel carburetor
The fix is replacing the leaking part.
how do you break a rainbow vacuum
The only fix for a leaking heater core is to replace it.
It could be leaking from a number of places. Some could be a simple fix and others not so simple. Need more info as to where it is leaking.
Lick the cheese.
You replace it.
The only fix for a leaking heater core is to replace it.