Miliamps aren't like volts, it should not matter how many miliamps are provided, a piece of technology will only accept what it needs, so, the answer is yes it will work.
Which cable type is needed for a hardwire internet connection?
Hi, It really depends on your PIP output on the cable box and whether or not the output is HDTV or standard TV. And in some cases, the PIP output will only display non-HDTV channels, depending again, on the box and the cable company. However, IF the cable company says that a HDTV signal is available from the PIP output on the cable box, then it'll probably work. The only way to be sure is to connect a TV and find out. Hope this helps, Cubby
A ribbon cable can carry information in either direction, either in or out.
To get your PS3 to output in 720P you will need an HDMI cable and an HDTV. Connect your PS3 to the HDTV using the HDMI cable. After you connect the PS3 to the HDTV go to options and then output setting and choose to output in 720p.
It does not have a speedometer cable. The system is all electronic. There is a sensor at the passenger axle output housing of the transmission.It does not have a speedometer cable. The system is all electronic. There is a sensor at the passenger axle output housing of the transmission.
You can buy USB network card, it will solve your problem.
A usb cable is not a device. A USB drive would be a Storage Device and still not be an Input or Output device. A USB keyboard would be an input device and a USB printer would be an output device.
A usb cable is not a device. A USB drive would be a Storage Device and still not be an Input or Output device. A USB keyboard would be an input device and a USB printer would be an output device.
This is a typical problem when a PS3 is updated or reset for some reason, and the Video Output settings are changed, or you moved it from one monitor to another one and used a different output (e.g., Component Out on one and HDMI on the next).First try and see if you can get a video output on any monitor at all using any type of output. If you can, then you'll need to setup the Video Output to the monitor you're normally going to use it with. If it's still set to the original output setting you had before the problem, then it's either the output itself or the cable itself. You can't go by a "cable missing" message - some systems only sense the connector when it's contacting the output connection, not the cable itself. Never assume the cable is good until you've proven it to work on another system.
It does not have a cable. The speed signal comes from the trasnmission output speed sensor.
Since its charge output is a standard USB port, you just use the charging cable that came with your device.
The console, a Dualshock 3, 1 USB cable, power supply and an A/V output cable (No HDMI).