Want this question answered?
An olds 350 engine such as one that they put in the 1979 toronados. Don't think you could put a Chevy 350 in without major mods.
Yes in the '79 to '85 toronado's. You will need an olds 350 engine such as the ones put in the '79 toronado's.
hay i am jitendra haldar can you Harmonic progression explane with examples
what year and type of olds engine??
You buy tools and install it!
Oil pumps pick oil out of the oil pan and circulate it throughout the engine. The are located at the bottom of the engine at the lowest point of the pan.
if it has a northstar engine, it requires a special tool to install/remove. the pump is threaded into the engine block. the store where you get the tool from should be able to point it out to you more clearly.
3,853 lbs
Yes you can upgrade to a 350 but only if it is an Oldsmobile 350 and you will need to use small block olds toronado intake from a 307 so you will have hood clearance-you may need to enlarge ports in intake to match 350 head ports but probably not much. You can use your 307 heads on the 350 but I would put bigger valves in those heads before I used them with a 350 and porting would not hurt if you want much performance. The Olds 350 will have a lot more power stock than the 307
you have too take the front motor mount loose and lift the engine to install it
On the 3.5L The thermostat is actually part of the water neck on the front of the motor. Passenger side on the front. Follow the radiator hose to the engine. Where it goes into the engine is the water neck. It is all one piece.
Heater core is inside dash board by firewall.