hay i am jitendra haldar can you Harmonic progression explane with examples
Not too familiar with that engine, but never use a hammer to press it on. Go to your local Kragen, Shucks or autozone, they have a harmonic balancer installer in which you can rent. It simply screws into the center of the shaft and evenly presses the harmonic balancer onto the crankshaft.
The harmonic balancer is located on the front of the crankshaft
by the harmonic balancer
the crank sensor is behind the harmonic balancer
behind the harmonic balancer
on a 1994 it's behind the harmonic balancer
The harmonic balancer must be removed to change the sensor because the crank position triggering rings on the back of the balancer are entwined with the pick-up, Sorry
It is located behind the harmonic balancer, also called the vibration dampener.
rocks hit balencer from road
Crankshaft sensor for the 96 olds 3.8 v/6 is behind the harmonic balancer mounted on a bracket. It is adjustable and must be set properly to avoid damage to the replacement. There is a clearance issue between the sensor and the blades attached to the back side of the harmonic balancer.
Does the LSS have a 3.8L engine? If so, the crank sensor is behind the crank pulley/harmonic damper.
Yes in the '79 to '85 toronado's. You will need an olds 350 engine such as the ones put in the '79 toronado's.