Most pool dealers should have vinyl patch kits that can be used underwater. One tip is to cut the patch round or oval in shape, no sharp corners as over time sharp corners will start to roll up and come unglued.
We used Garrett Vinyl Pools they have been around for years.
what you can do in this situation depends on what is under the vinyl liner now.
There is special adhesive for this,sold in pool maintenance stores.
If the rip is not tool arge you can use an undewater patch for vinyl liner with vinyl adhesive - it works underwater - you apply the adheive generopusly all ovetr the patch cut to bigger than the rip size, fold in half with adhesive on the inside, go into water to rip and unfold, smooth out bubbles and apply pressure to hold especially at the edges
Vinyl liner patch kit are available at pool dealers and at stores like Walmart. They usually consist of some clear vinyl and some liquid glue. The best thing is to use vinyl that matches your pool liner. I always save scraps when new liner is installed. First trim the patch to cover the hole. A round or oval patch works best since there are no corners to peel off. Next clean the place to be patched. Then cover the back of the patch with glue. If the tear is under water fold the patch together with the glue on the inside. Next open the patch and place it over the tear and press the air out starting from the center working outward. If the tear is deep under water you may need to find a diver.
Cannot be answered without further information. What is the adhesive? Are you under water or dry? Is it a tile or marcite surface? Please asvise
YES.
As long as the vinyl liner pool is inground, it can be converted. But you'll probably have to remove all of the vinyl pool elements until you have reduced the pool to a big hole in the ground and then start from there. All it takes is time and money!
The walls of some above ground and some inground vinyl liner pool kits are made of aluminum.
Some pool companys are not in business. most all inground pools have the same size treads..
If you have water behind your vinyl in ground pool liner, you should first lower the water in the pool to normal levels if it is over-filled. Make sure that the vacuum pipe is clear, unclog it if it is not. Once it is unblocked let the water from behind the liner flow out.