yes you can
I believe that a Renault 19 1.8 16v engine is the same as clio 1.8 16v engine and as long as you have the right brackets am sure it would
There is a sensor screwed into the bottom left of the radiator as you face the car.
Just had to have mine done. Parts are only around
I don't have the ability to provide images or diagrams directly. However, you can typically find a Renault 19 engine diagram in the vehicle's service manual or by searching online through automotive forums, repair websites, or parts retailers that specialize in Renault vehicles. If you need specific information about the engine components, I'd be happy to help!
hi m8 i believe it will, in theory they are the same engine! the harneses shud also fit.
5.9L Gas 19 L (20 qts.) 5.9L Diesel 22.7 L (24.0 qts.)
Normally if you follow the top radiator holes to the engine should be right underneath the thermostat housing
The short answer is no! Although from memory, you will have to support the engine on the timing belt side (front of the engine) as the engine mounting on that side needs to be removed.
Dr. Renault's Secret was created on 1942-10-19.
The valve clearance for a 1994 Renault 19 1.4 is typically set at 0.15 mm for the intake valves and 0.25 mm for the exhaust valves when the engine is cold. It's essential to check the specifications in the vehicle's service manual, as there can be slight variations based on the specific engine type or configuration. Always ensure the engine is at the correct temperature and the vehicle is on a level surface before making adjustments.
17cmts.....
Remove filler cap from engine bay under car on sunp of engine there will be a square bolt, this needs to be removed (tool can be purchased from any good car shop) remove the screw and the oil will drain from sump, make sure you have something to catch all the oil. put plug back in and fill new oil in through the filler cap under the engine bay. renault dealership how much oil does a renualt laguna 2000 (w) hold.with new filter