The short answer is no! Although from memory, you will have to support the engine on the timing belt side (front of the engine) as the engine mounting on that side needs to be removed.
The diesel engine Citroen C3 have the fuel filter located in the engine bay, under the air intake pipe to the air filter. There are some pictures on this forum post: http://citroenc3owners.com/diesel-c3-tips/how-to-change-the-air-filter-on-a-citroen-c3-1-4-16v-hdi-t80.html and some instructions to remove the diesel filter here: http://citroenc3owners.com/diesel-citroen-c3/changing-the-diesel-fuel-filter-t102.html The petrol engine Citroen C3 has a filter in the fuel tank that lasts the life of the car.
To remove the turbo from a Citroën Picasso diesel engine, first ensure the vehicle is securely lifted and supported. Disconnect the battery, then remove any components obstructing access to the turbo, such as the intake pipe and exhaust manifold. Detach the oil feed and return lines, and unbolt the turbo from the engine block. Finally, carefully lift the turbo out of its housing, ensuring no debris falls into the engine.
were is engine cover wot does it do
To change the thermostat on a Citroen C3, first, ensure the engine is cool and disconnect the battery. Drain the coolant from the radiator and remove the necessary components to access the thermostat housing, typically located near the engine block. Remove the old thermostat, clean the mating surfaces, and install the new thermostat with a new gasket. Reassemble everything, refill the coolant, and check for leaks before starting the engine.
Remove the cylinder head from your VW engine. Remove the head gasket and clean the head gasket surface. Put the new head gasket on and return the cylinder head to its original position.
how to remove the timing cover for a landrover freelander diesel engine
Remove the cylinder heads from your Chevy engine. Remove the head gasket and clean the head gasket surface. Put the new head gasket on and reverse the process.
how to remove starter on 1996 chevrolet 2500 with 6.5 diesel engine
Being a Citroen Xantia,it doesn't have a brake master cylinder. The brakes and power steering both work from the hydraulic pressure of the suspension system
keepundoing bolts till the engine falls away and your left with just the head gasket
is this a gas or diesel if it is a diesel , on top of engine is a pot with a black top unscrew this blck top remove filter. replace with a new filter and a new "O" ring gasket for top screw top back on start engine it it is a gas engine i cant help you cause i dont know where it is
No, it can be done with the engine in the vehicle.