answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered
2011-01-29 14:50:08
2011-01-29 14:50:08

Yes you can use brake fluid in the hydraaulic clutch system the cover on the reservoir should be marked dot 3 brake fluid also check for leaks at slave cylinder at bellhousing.

001
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


You put brake fluid for the clutch master cylinder


It uses brake fluid in the brake fluid reservoir. The clutch fluid (brake fluid) is fed by the brake fluid reservoir. The clutch fluid reservoir is just beneath the brake fluid reservoir. So, add fluid to the brake fluid reservoir to fill the clutch fluid, also.


There is no fluid in the clutch....The clutch master cylinder takes DOT 3 brake fluid. It is the same fluid that you put into the brake master cylinder


The clutch and brake share the same fluid


your clutch run's of off your brake fluid the place where you put your brake fluid in to fill it up there is a hose the run's from it. it goes to your clutch master cylinder


The clutch does not use oil, it uses DOT3 brake fluid. The clutch cylinder gets its brake fluid from the brake cylinder and is directly below it. Add fluid to the master brake cyliinder reservoir.


The fluid used for the hydraulic clutch is DOT 3 brake fluid


Astras usually share brake fluid with the clutch fluid resiviour


On a 2006 Ford Escape : The brake fluid reservoir is also the clutch fluid reservoir


The clutch fluid on all Escorts uses brake fluid from the brake fluid reservoir. The clutch master cylinder is just below the brake fluid master cylinder and is fed fluid from it. Make sure it doesn't run dry or you'll have to bleed the brakes.


Yes, there is no such thing as clutch fluid. It's all brake fluid.


Not in the transmission , but the hydraulic clutch on a Ford Ranger uses DOT 3 brake fluid


According to the Owner Guide , the clutch master cylinder and the brake master cylinder are part of the same system . The clutch and the brake system can be filled at the brake master cylinder with DOT 3 brake fluid


The clutch fluid is located in the same reservoir as the brake fluid. As a dot 4 brake fluid, used for the breaks and the clutch.


Yes, one reservoir is for brakes the other for the clutch. They both use brake fluid though.


Brake Fluid Dot 3 Note: Brake and Clutch fluid are the same


The clutch reservoir is next to the brake reservoir under the hood, on the driver side. They both use dot 3 brake fluid.


The clutch uses DOT 3 or 4 brake fluid, and shares the reservoir with the brake system. The brake fluid reservoir is the same as the clutch fluid reservoir.


1. Clutch fluid is brake fluid. 2. The fluid used for your clutch master/slave cylinders is pulled from your brake fluid reservoir.


It can be, a lot of hydraulic clutch systems do use DOT 3 or 4 brake fluid.


The fluid in the clutch master cylinder is brake fluid. Use DOT 3 or similar brake fluid for fluid replacement.


The fluid for the clutch comes from the brake fluid. After the brake master cylinder, there is a clutch master cylinder which takes fluid from the brakes. Fill up the Brake master cylinder.


DOT ( 3 ) brake fluid is used for the hydraulic clutch in a Ford Ranger


IN THE BRAKE MASTER CYLINDER RESERVOIR.


the manual trans fluid runs from the brake fluid i had a 1990 Honda ef hatch an i had to fill the brake fluid an it shifted koo after that. Brake fluid operates the clutch. Do not put brake fluid into the standard transmission.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.